Data

Vlaming Sub-Basin Marine Environmental Survey (GA-0334/S. Supporter GP1373)(NCIP Program) - High Resolution Bathymetry grids

Geoscience Australia
Spinoccia, M. ; Buchanan, C.
Viewed: [[ro.stat.viewed]] Cited: [[ro.stat.cited]] Accessed: [[ro.stat.accessed]]
ctx_ver=Z39.88-2004&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Adc&rfr_id=info%3Asid%2FANDS&rft_id=https://pid.geoscience.gov.au/dataset/ga/78540&rft.title=Vlaming Sub-Basin Marine Environmental Survey (GA-0334/S. Supporter GP1373)(NCIP Program) - High Resolution Bathymetry grids&rft.identifier=https://pid.geoscience.gov.au/dataset/ga/78540&rft.publisher=Geoscience Australia&rft.description=Geoscience Australia conducted a marine survey to provide seabed environmental information to support the assessment of the CO2 storage potential of the Vlaming Sub-Basin. The survey was undertaken under the Australian Government's National CO2 Infrastructure Plan (NCIP) to help identify sites suitable for the long term storage of CO2. The major aim of this survey was to look for evidence of any gas fluid seepage at the seabed and wether the location had faults that have been identified in a number of seismic lines. The survey also mapped seabed biota in the area of interest to indentify any biota communities that are related with seepage. This research addresses key questions of the regional seal integrity of the Southern Perth Shale and the potential for storing of CO2 in the Early Cretaceous Gage Sandstone. The survey was conducted by Fugro's Southern Supporter in the Vlaming Sub-Basin, North and South of Rotnest Island between the period of the 17th of March to the 20th of April 2012. Shallow seismic sub bottom profiler data were acquired as well as high resolution multibeam bathymetry and backscatter data during the survey. This dataset is not to be used for navigational purposes.This dataset is not to be used for navigational purposes.Maintenance and Update Frequency: asNeededStatement: The Vlaming Sub-Basin survey, GA-0334 GP1373 was acquired by Geoscience Australia onboard the RV Southern Supporter from the 17th of March to the 20th of April 2012. The GA representative onboard was Mr. George Bernardel. This dataset was acquired and processed onboard by Fugro and further reprocessing of the data was conducted in the office by Cameron Buchanan and by Michele Spinoccia, using CARIS HIPS & SIPS ver 7.1.2. The naming of the raw bathymetry data had to be changed to show the date, time and vessel. Then the timing of the raw and the processed data needed to matched as the raw and processed bathymetry data timing did not match. Then the navigation for different files/days were missing and needed to be loaded and merged with the rest of the dataset. 1. First a vessel configuration file was created where the co-ordinates of the motion sensor and DGPS antenna and patch test offsets were recorded. 2. A new project was then created and the vessel configuration file was attached to the project file. 3. The raw swath sonar data, in raw.all format, for each line was then imported into the project and the vessel information assigned to the data. 4. The motion sensor, DGPS and heading data were then cleaned using a filter that averaged adjacent data to remove artifacts. 5. Different sound velocity profiles data for each block were attached to the corresponding raw swath sonar data files to correct the depths for changes in the speed of sound through the water column. 6. Then a new blank field area was defined that specified the geographic area of study and the co-ordinate system used. The co-ordinates for the study areas were WGS84 UTM-50S. 7. The data was cleaned by applying several filters that removed any remaining spikes in the bathymetry data using user defined threshold values. A visual inspection of the data for each line was then undertaken where artifacts and noisy data not removed by the filtering process were removed manually using Swath and subset editors modules of the Caris HIPS/SIPS software. 8. All the data for each bathymetric, motion sensor, DGPS, heading, tide and sound velocity profile data were merged to produce the final processed data file. A weighted grid of the processed data was then created for each Block. In GA the tide was applied to the grid to correct for tidal variations and velocity corrections were performed to correct for different artifacts and mismatches. 9. The processed data was finally exported as grids soundings or false colored images for presentation and reporting and as final processed data in in ASCII XYZ as well as geotif formats of 50m resolution. 10-Using CARIS Base editor 4.0 the grids were exported as ESRI ASCII grid, then imported into ARC catalogue/info to create a raster file for the entire survey.&rft.creator=Spinoccia, M. &rft.creator=Buchanan, C. &rft.date=2013&rft.coverage=westlimit=115.24; southlimit=-32.35; eastlimit=115.74; northlimit=-31.79&rft.coverage=westlimit=115.24; southlimit=-32.35; eastlimit=115.74; northlimit=-31.79&rft_rights=&rft_rights=Creative Commons Attribution 4.0 International Licence&rft_rights=CC-BY&rft_rights=4.0&rft_rights=http://creativecommons.org/licenses/&rft_rights=WWW:LINK-1.0-http--link&rft_rights=Australian Government Security ClassificationSystem&rft_rights=https://www.protectivesecurity.gov.au/Pages/default.aspx&rft_rights=WWW:LINK-1.0-http--link&rft_rights=Creative Commons Attribution 4.0 International Licence http://creativecommons.org/licenses/by/4.0&rft_subject=geoscientificInformation&rft_subject=ENVIRONMENTAL SCIENCES&rft_subject=HVC_144641&rft_subject=AusSeabed&rft_subject=Marine Data Bathymetry Grid&rft_subject=bathymetry&rft_subject=marine survey&rft_subject=environmental&rft_subject=continental shelf&rft_subject=marine&rft_subject=WA&rft_subject=Published_External&rft.type=dataset&rft.language=English Access the data

Licence & Rights:

Open Licence view details
CC-BY

Creative Commons Attribution 4.0 International Licence
http://creativecommons.org/licenses/by/4.0

Creative Commons Attribution 4.0 International Licence

CC-BY

4.0

http://creativecommons.org/licenses/

WWW:LINK-1.0-http--link

Australian Government Security ClassificationSystem

https://www.protectivesecurity.gov.au/Pages/default.aspx

WWW:LINK-1.0-http--link

Access:

Open

Brief description

Geoscience Australia conducted a marine survey to provide seabed environmental information to support the assessment of the CO2 storage potential of the Vlaming Sub-Basin. The survey was undertaken under the Australian Government's National CO2 Infrastructure Plan (NCIP) to help identify sites suitable for the long term storage of CO2. The major aim of this survey was to look for evidence of any gas fluid seepage at the seabed and wether the location had faults that have been identified in a number of seismic lines. The survey also mapped seabed biota in the area of interest to indentify any biota communities that are related with seepage. This research addresses key questions of the regional seal integrity of the Southern Perth Shale and the potential for storing of CO2 in the Early Cretaceous Gage Sandstone. The survey was conducted by Fugro's Southern Supporter in the Vlaming Sub-Basin, North and South of Rotnest Island between the period of the 17th of March to the 20th of April 2012. Shallow seismic sub bottom profiler data were acquired as well as high resolution multibeam bathymetry and backscatter data during the survey. This dataset is not to be used for navigational purposes.

This dataset is not to be used for navigational purposes.

Lineage

Maintenance and Update Frequency: asNeeded
Statement: The Vlaming Sub-Basin survey, GA-0334 GP1373 was acquired by Geoscience Australia onboard the RV Southern Supporter from the 17th of March to the 20th of April 2012. The GA representative onboard was Mr. George Bernardel. This dataset was acquired and processed onboard by Fugro and further reprocessing of the data was conducted in the office by Cameron Buchanan and by Michele Spinoccia, using CARIS HIPS & SIPS ver 7.1.2. The naming of the raw bathymetry data had to be changed to show the date, time and vessel. Then the timing of the raw and the processed data needed to matched as the raw and processed bathymetry data timing did not match. Then the navigation for different files/days were missing and needed to be loaded and merged with the rest of the dataset. 1. First a vessel configuration file was created where the co-ordinates of the motion sensor and DGPS antenna and patch test offsets were recorded. 2. A new project was then created and the vessel configuration file was attached to the project file. 3. The raw swath sonar data, in raw.all format, for each line was then imported into the project and the vessel information assigned to the data. 4. The motion sensor, DGPS and heading data were then cleaned using a filter that averaged adjacent data to remove artifacts. 5. Different sound velocity profiles data for each block were attached to the corresponding raw swath sonar data files to correct the depths for changes in the speed of sound through the water column. 6. Then a new blank field area was defined that specified the geographic area of study and the co-ordinate system used. The co-ordinates for the study areas were WGS84 UTM-50S. 7. The data was cleaned by applying several filters that removed any remaining spikes in the bathymetry data using user defined threshold values. A visual inspection of the data for each line was then undertaken where artifacts and noisy data not removed by the filtering process were removed manually using Swath and subset editors modules of the Caris HIPS/SIPS software. 8. All the data for each bathymetric, motion sensor, DGPS, heading, tide and sound velocity profile data were merged to produce the final processed data file. A weighted grid of the processed data was then created for each Block. In GA the tide was applied to the grid to correct for tidal variations and velocity corrections were performed to correct for different artifacts and mismatches. 9. The processed data was finally exported as grids soundings or false colored images for presentation and reporting and as final processed data in in ASCII XYZ as well as geotif formats of 50m resolution. 10-Using CARIS Base editor 4.0 the grids were exported as ESRI ASCII grid, then imported into ARC catalogue/info to create a raster file for the entire survey.

Issued: 2013

Data time period: 2012-03-17 to 2012-04-20

This dataset is part of a larger collection

115.74,-31.79 115.74,-32.35 115.24,-32.35 115.24,-31.79 115.74,-31.79

115.49,-32.07

text: westlimit=115.24; southlimit=-32.35; eastlimit=115.74; northlimit=-31.79

Subjects

User Contributed Tags    

Login to tag this record with meaningful keywords to make it easier to discover

Other Information
Link to Data and information on seabed environments of the Vlaming sub-basin, Western Australia. (Related Product)

uri : 'https://pid.geoscience.gov.au/dataset/ga/79348

Link to Underwater video footage from the Vlaming Sub-basin (GA334) (Related Product)

uri : https://pid.geoscience.gov.au/dataset/ga/74276

Link to Seabed Environments and Shallow Geology of the Vlaming Sub-Basin, Western Australia - Supporting Investigation for Geological Storage of CO2 GA334 Marine Environmental Survey Post-Survey Report (Related Product)

uri : https://pid.geoscience.gov.au/dataset/ga/74626

Link to GA0334 Vlaming sub-basin Species identification of worms from grab (Related Product)

uri : https://pid.geoscience.gov.au/dataset/ga/76463

Link to Seabed environments and shallow geology of the Vlaming sub-basin, Western Australia: Chlorin analyses of seabed sediments. (Related Product)

uri : https://pid.geoscience.gov.au/dataset/ga/78550

Link to Seabed environments and shallow geology of the Vlaming sub-basin, Western Australia: Inorganic elements of seabed sediments. (Related Product)

uri : https://pid.geoscience.gov.au/dataset/ga/78551

Link to Seabed environments and shallow geology of the Vlaming sub-basin, Western Australia: Bulk organic carbon and nitrogen isotopes and concentrations in seabed sediments. (Related Product)

uri : https://pid.geoscience.gov.au/dataset/ga/78552

Link to Seabed environments and shallow geology of the Vlaming sub-basin, Western Australia: Sediment oxygen demand of seabed sediments. (Related Product)

uri : https://pid.geoscience.gov.au/dataset/ga/78553

Link to Seabed environments and shallow geology of the Vlaming sub-basin, Western Australia: Chlorophyll a, b and c of seabed sediments. (Related Product)

uri : https://pid.geoscience.gov.au/dataset/ga/78564

Link to Seabed environments and shallow geology of the Vlaming sub-basin, Western Australia: %carbonate and specific surface area of seabed sediments. (Related Product)

uri : https://pid.geoscience.gov.au/dataset/ga/78565

Link to Seabed Environments and shallow sub-surface geology of the Vlaming Sub-basin, offshore Perth Basin: Summary results from marine survey GA0334 (Related Product)

uri : https://pid.geoscience.gov.au/dataset/ga/78846

Link to Seabed environments and shallow geology of the Vlaming sub-basin, Western Australia: Grain size and carbonate concentrations of seabed sediment. (Related Product)

uri : https://pid.geoscience.gov.au/dataset/ga/79176

Link to An Integrated Study of the CO2 Storage Potential in the Offshore Vlaming Sub-Basin: Results of the study undertaken as part of the NCIP program (Related Product)

uri : https://pid.geoscience.gov.au/dataset/ga/79332

Link to Ecology / Infaunal morphospecies identifications from the Vlaming Sub-basin (GA0334) (Related Product)

uri : https://pid.geoscience.gov.au/dataset/ga/79345

Link to Predicted seabed gravel, mud and sand content in the Vlaming sub-basin in the Australian continental EEZ 2013 (Related Product)

uri : https://pid.geoscience.gov.au/dataset/ga/79352

Link to Seabed environments and shallow geology of the Vlaming sub-basin, Western Australia - interpreted geomorphic map. (Related Product)

uri : https://pid.geoscience.gov.au/dataset/ga/79578

Link to Vlaming Sub-Basin Marine Environmental Survey (GA-0334/S. Supporter GP1373)(NCIP Program) - High Resolution Backscatter grids (Related Product)

uri : https://pid.geoscience.gov.au/dataset/ga/82975

Link to Vlaming Sub-Basin Marine Environmental Survey (GA-0334/S. Supporter GP1373)(NCIP Program) - Sidescan grids (Related Product)

uri : https://pid.geoscience.gov.au/dataset/ga/82976

Link to Processed sub-bottom profiler data - Seabed environments and shallow geology of the Vlaming Sub-basin, offshore Perth Basin (GA0334) (Related Product)

uri : https://pid.geoscience.gov.au/dataset/ga/83724

ESRI raster format (File download)

uri : https://d28rz98at9flks.cloudfront.net/78540/78540_esri_raster_grids.zip

XYZ ascii format (File download)

uri : https://d28rz98at9flks.cloudfront.net/78540/78540_ascii_xyz.zip

Caris Csar format (File download)

uri : https://d28rz98at9flks.cloudfront.net/78540/78540_caris_csar.zip

Geotif format (File download)

uri : https://d28rz98at9flks.cloudfront.net/78540/78540_geotifs.zip

Vlaming Sub-Basin Bathymetry 2012 2m (zip) [457 MB]

uri : https://files.ausseabed.gov.au/survey/Vlaming%20Sub-Basin%20Bathymetry%202012%202m.zip

Identifiers