Brief description
This phase of Project 3DGBR involved manual digitising of geomorphic map boundaries for the key seafloor features identified in the gbr100 grid, particularly for the inter-reefal area on the GBR shelf and in the Coral Sea Conservation Zone (CSCZ). See map for CSCZ boundary at: https://www.environment.gov.au/topics/marine/marine-reserves/coral-sea/conservation-zone Methods: GIS spatial analysis of the gbr100 grid was conducted in order to derive a number of useful background datasets for assisting in the digitising process, such as slope, aspect, hillshading, and dense contour lines. The digitising initially focused on the deep-water (>100 m) environment to develop geomorphic maps for the continental slope, Queensland and Townsville Troughs lying within the Great Barrier Reef World Heritage Area (GBRWHA), and for the Queensland Plateau, Coral Sea Basin, Tasman Basin, and Lord Howe Rise area lying within the adjoining Coral Sea Conservation Zone (CSCZ). The project lastly focuses on the shallow-water (<100 m) environment to develop geomorphic maps for the GBR shelf to complement the shallow reef feature maps provided by GBRMPA. These shallow-water geomorphic features will be added to the project as they come available. Format: This dataset consists of 21 shapefiles and a GeoTiff raster file containing hillshading. Each of the shapefiles is described below. Group Layer 1. Boundaries: gbrwha_outer.shp This Great Barrier Reef World Heritage Area (GBRWHA) layer was initially provided by GBRMPA using a GDA94 datum. The shapefile was reprojected to the WGS84 datum, and then the western coastline boundaries deleted to derive a line shapefile showing only the outer boundary of the GBRWHA where it extends away from the mainland. qld_gbrwha_cscz.shp This line shapefile combines both the GBRWHA and Coral Sea Conservation Zone (CSCZ) areas, with a western boundary limit at the Queensland mainland coastline. This area was used to clip all geomorphic features created in this project. Group Layer 2. GBRMPA features: gbr_dryreef.shp The GBR shelf dryreefs shapefile was initially provided by GBRMPA for this project using a GD94 datum. The shapefile was reprojected to the WGS84 datum and not modified in any other way. It is provided here only for completeness but and products using this shapefile should also acknowledge GBRMPA (see under licensing). gbr_features.shp The GBR shelf features were initially provided by GBRMPA for this project using a GDA94 datum. The shapefile was reprojected to the WGS84 datum, and then the Ashmore Reef polygon deleted due to a grossly incorrect position. The shapefile comprises Cay, Island, Mainland, Reef, Rock and Sand features. Users may contact GBRMPA to obtain details for the creation of these features. Any products using this shapefile should also acknowledge GBRMPA (see under licensing). Group Layer 3. Finer-scale features: coralsea_cay.shp Cay is a sand island elevated above Australian Height Datum (AHD), and located on offshore coral reefs and seamounts. Cays were mapped initially using a shapefile provided by Geoscience Australia for this project, and then their boundaries checked or remapped using Landsat imagery as background source data to help delineate the white sand areas against the surrounding ocean. coralsea_dryreef.shp Dryreef is rock/coral lying at or near the sea surface that may constitute a hazard to surface navigation. Dryreefs were mapped initially using a shapefile provided by Geoscience Australia for this project, which identified those reef areas lying above approximately Lowest Astronomic Tide (LAT). Landsat imagery was used as background source data to check or remap their boundaries. coralsea_reef.shp Reef is rock/coral lying at or near the sea surface that may constitute a hazard to surface navigation. For this project, the boundaries of reef areas were mapped to show the outer-most extent of each coral reef that could be observed in Landsat imagery, thus identifying the greatest area of each reef observed in the Coral Sea. This methodology is consistent with the methodology used to map the outer-most extents of reefs on the GBR shelf conducted by GBRMPA. coralsea_ridge.shp Ridge is a long, narrow elevation with steep sides. In this project, ridges were mapped as widely-scattered and uncommon, finer-scale features identified in the gbr100 grid. These elongate ridges are distinct from the smaller knolls or hills which have a more rounded shape. They are usually found on the plateaus of the Lord Howe Rise. coralsea_bank.shp Bank is an elevation over which the depth of water is relatively shallow but normally sufficient for safe surface navigation. In this project, banks were mapped as the base or pedestal boundaries of the coral reefs found in the Coral Sea. For example, the coral atolls and reefs on the Queensland Plateau are considered banks and their bases digitised where they emerge from the surrounding flat seafloor. coralsea_knoll.shp Knoll is a relatively small isolated elevation of a rounded shape. This shapefile also includes Abyssal hill, a low (100 – 500 m) elevation on the deep seafloor. For this project, knolls and abyssal hills were mapped using background datasets that showed relatively steep changes in elevation contours and variations in slope gradients. Knolls are numerous throughout the Coral Sea area and are greatly underestimated. coralsea_canyon.shp Canyon is a relatively narrow, deep depression with steep sides, the bottom of which generally has a continuous slope, developed characteristically on continental slopes. Canyons were mapped by closely following the narrow sides of canyon axes, digitising from the foot of the canyon where they merge with the surrounding basin floor, and up to the canyon head and into any connecting side gullies. This project identified numerous canyons on any slope gradient >1° and are also greatly underestimated across the area. coralsea_seamount.shp Seamount is a large isolated elevation >1000 m in relief above the seafloor, characteristically of conical form. This shapefile also includes Guyot, a seamount having a comparatively smooth flat top. Seamounts and guyots were mapped mostly within the Tasmantid Seamount Chain with elevations >1000 m. This project identified several large knolls and hills close to 1000 m in height within this chain that may also be seamounts but currently lack detailed bathymetry data. Group Layer 4. Broader-scale features: gbr_shelf.shp Shelf is a zone adjacent to a continent (or around an island) extending from the low water line to a depth at which there is usually a marked increase of slope towards oceanic depths. The eastern boundary of the Queensland continental shelf was mapped by closely following the change in gradient along the shelf edge. The shelf break in the north was at approximately 80 m and became deeper at about 110 m towards the south. The western boundary was clipped at the Queensland mainland coastline. coralsea_slope.shp Slope lies seaward from the shelf edge to the upper edge of a continental rise or the point where there is a general reduction in slope. The continental slope was mapped lying adjacent to the shelf and extending into the adjacent deep basins and troughs. The shelf feature was used to erase the western boundary of the slope and the various basins and troughs erased the eastern slope border. The slope has extensive canyons incising its surface. coralsea_terrace.shp Terrace is a relatively flat horizontal or gently inclined surface, sometimes long and narrow, which is bounded by a steeper ascending slope on one side and by a steeper descending slope on the opposite side. In this project, one broad-scale terrace feature was mapped lying on the slope between the Swains Reefs and Capricorn-Bunker Group of reefs, and near the Capricorn Trough. coralsea_plateau.shp Plateau is a flat or nearly flat area of considerable extent, dropping off abruptly on one or more sides. Extensive areas of plateaus were mapped across the Coral Sea with the largest being the Queensland Plateau. Lord Howe Rise consists of a series of plateaus separated by broad-scale valleys linking adjacent basins and troughs. Plateau boundaries were mapped around their bases where the gradient first becomes steeper. The exceptions are the Marion and Saumarez Plateaus on the Queensland continental slope, where the boundaries were mapped as the slope gradient becomes flat or nearly flat. coralsea_valley.shp Valley is a relatively shallow, wide depression, the bottom of which usually has a continuous gradient. This term is generally not used for features that have canyon-like characteristics for a significant portion of their extent. The shapefile includes Hole, a local depression, often steep sided, of the seafloor. Valleys and holes were mapped as long shallow depressions that often separated the numerous plateaus. These features link the basins and troughs that surround these plateaus, and in some cases can be incised with finer-scale canyons. coralsea_trough.shp Trough is a long depression of the seafloor characteristically flat bottomed and steep sided and normally shallower than a trench. In this project, two trough features were mapped that are essentially long basins. The larger feature is a combined Queensland and Townsville Trough lying between the continental slope and the Queensland Plateau. The smaller feature is the Bligh Trough separating the northern slope and Eastern Plateau. Both trough features feed into the Osprey Embayment and huge Bligh Canyon. coralsea_rise.shp Rise is a gentle slope rising from the oceanic depths towards the foot of a continental slope. For this project, an elongate rise is mapped between the Queensland Plateau and the adjacent Coral Sea Basin. The Queensland Plateau is remnant continental crust from the Gondwana breakup and so its seaward edge provides a geomorphic extension of the Australian margin, albeit at a much deeper depth than the present mainland margin. The rise was mapped where the gradient angle of the Queensland Plateau seaward edge first becomes less steep and finishes at the Coral Sea Basin abyssal plain. Another rise feature was mapped between the southern continental slope and the Tasman Basin abyssal plain. coralsea_basin.shp Basin is a depression, characteristically in the deep seafloor, more or less equidimensional in plan and of variable extent. Basins were mapped where their boundaries changed from generally flat to more steep gradients. Plateau or slope features were used to erase and limit the boundaries of the basin features. In the north lies the large Osprey Embayment which has smaller plateaus lying within its area. The Cato Trough is a large basin separating the southern continental slope and plateaus of the Lord Howe Rise area. On the Lord Howe Rise are shallow basins that surround the series of plateaus that lie on the Lord Howe Rise. coralsea_abyssalplain.shp Abyssal plain is an extensive, flat, gently sloping or nearly level region at abyssal depths. Three abyssal plains were mapped where their gradients became generally flat and at depths greater than about 4000 m. In the north are the abyssal plains of the Coral Sea Basin and Louisiade Basin, the latter being a failed arm of a rift triple junction. In the south, lies the abyssal plain of the Tasman Basin. Group Layer 5. Background image: gbr100_geo3.tif This hillshade geotif image was derived from the gbr100 grid using Fledermaus 3D visualization software with a depth colour scheme configured to highlight the physiographic relief of the shallow shelf and the deeper seabed features. It is provided here to give geomorphic context to the seabed areas lying outside of the GBRWHA and CSCZ. Funding: Queensland Government Smart Futures Fellowship Reef and Rainforest Research Centre James Cook University References: Heap, A.D., Harris, P.T., 2008. Geomorphology of the Australian margin and adjacent seafloor. Australian Journal of Earth Sciences 55(4), 555-585. doi: 10.1080/08120090801888669 IHO, 2008. Standardization of Undersea Feature Names: Guidelines, Proposal Form, Terminology. Bathymetric Publication No.6, 4th Edition, International Hydrographic Bureau/Intergovernmental Oceanographic Commission, Monaco, pp. 32.Notes
Project 3DGBR aimed to develop a geomorphic classification of seabed habitat types based upon a suit of standard geomorphic descriptors of topographical and geological features (e.g. Heap and Harris, 2008; IHO, 2008). This work follows on from the development of the new 100 m-resolution bathymetry grid for the Great Barrier Reef (GBR) and offshore Coral Sea using all available data sources, called gbr100: http://www.deepreef.org/bathymetry/65-3dgbr-bathy.html These undersea landscape maps are required by marine managers to examine how effectively the current network of zoning protects the range of seabed habitats identified from the new depth model. A full description of Project 3DGBR is available at: http://www.deepreef.org/projects/48-depth-model-gbr.htmlLineage
The geomorphic datasets were manually digitised against background datasets that were derived from the gbr100 grid (V2.0, 23 June 2011). An explanation of the gbr100 grid development may be found in the report: Beaman, R.J., 2010. Project 3DGBR: A high-resolution depth model for the Great Barrier Reef and Coral Sea. Marine and Tropical Sciences Research Facility (MTSRF) Project 2.5i.1a Final Report, MTSRF, Cairns, Australia, pp. 13 plus Appendix 1. Available at: http://www.deepreef.org/images/stories/publications/reports/Project3DGBRFinal_RRRC2010.pdf Additional background source data were Landsat imagery used to assist in digitising the boundaries of shallow-water geomorphic features, such as the coral reefs and sand cays. AUSTRALIAN HYDROGRAPHIC SERVICE NOTICE: Not to be used for navigation. Certain material in this product are reproduced under licence by permission of The Australian Hydrographic Service © Commonwealth of Australia 2010. All rights reserved. This information may not be copied, reproduced, translated, or reduced to any electronic medium or machine readable form, in whole or part, without the prior written consent of the Australian Hydrographic Service. GEOSCIENCE AUSTRALIA NOTICE: This gbr100 DEM incorporates data which are © Commonwealth of Australia (Geoscience Australia) 2010. The Commonwealth gives no warranty regarding the data's accuracy, completeness, currency or suitability for any particular purpose. This dataset has been compiled from a wide range of data sources of varying resolution and accuracy. The resulting gbr100 DEM has some reefs shifted by up to 500m in the Swain Reefs area, due to a lack of source bathymetry data.Created: 15 02 2012
Issued: 20120215
Data time period: 03 08 1971 to 29 10 2009
text: northlimit=-10.0; southlimit=-24.5; westlimit=142.43; eastLimit=158.76; projection=EPSG
- URI : eatlas.org.au/data/uuid/25685ba5-6583-494f-974d-cce2f3429b78
- global : 25685ba5-6583-494f-974d-cce2f3429b78