Brief description
This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.7) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).
Tumbarumba flux station is located in Bago State Forest in south eastern New South Wales. It was established in 2000 and is managed by CSIRO Marine and Atmospheric Research. The forest is classified as wet sclerophyll, the dominant species is Eucalyptus delegatensis, and average tree height is 40 m. Elevation of the site is 1200 m and mean annual precipitation is 1000 mm. Bago and Maragle State Forests are adjacent to the south west slopes of southern New South Wales and the 48,400 ha of native forest have been managed for wood production for over 100 years. The instrument mast is 70 m tall. Fluxes of heat, water vapour and carbon dioxide are measured using the open-path eddy flux technique. Supplementary measurements above the canopy include temperature, humidity, wind speed, wind direction, rainfall, incoming and reflected shortwave radiation and net radiation. Profiles of temperature, humidity and CO2 are measured at seven levels within the canopy. Soil moisture content is measured using time domain reflectometry. Soil heat fluxes and temperature are also measured. Hyper-spectral radiometric measurements are being used to determine canopy leaf-level properties.
Notes
Data ProcessingFile naming convention
The NetCDF files follow the naming convention below:
SiteName_ProcessingLevel_FromDate_ToDate_Type.nc
- SiteName: short name of the site
- ProcessingLevel: file processing level (L3, L4, L5, L6)
- FromDate: temporal interval (start), YYYYMMDD
- ToDate: temporal interval (end), YYYYMMDD
- Type (Level 6 only): Summary, Monthly, Daily, Cumulative, Annual
- Summary: This file is a summary of the L6 data for daily, monthly, annual and cumulative data. The files Monthly to Annual below are combined together in one file.
- Monthly: This file shows L6 monthly averages of the respective variables, e.g. AH, Fc, NEE, etc.
- Daily: same as Monthly but with daily averages.
- Cumulative: File showing cumulative values for ecosystem respiration, evapo-transpiration, gross primary productivity, net ecosystem exchange and production as well as precipitation.
- Annual: same as Monthly but with annual averages.
Lineage
All flux raw data is subject to the quality control process OzFlux QA/QC to generate data from L1 to L6. Levels 3 to 6 are available for re-use. Datasets contain Quality Controls flags which will indicate when data quality is poor and has been filled from alternative sources. For more details, refer to Isaac et al. (2017).
Notes
CreditWe at TERN acknowledge the Traditional Owners and Custodians throughout Australia, New Zealand and all nations. We honour their profound connections to land, water, biodiversity and culture and pay our respects to their Elders past, present and emerging.
Tumbarumba site is managed by CSIRO Land and Water (Canberra) and is funded by TERN. Tumbarumba flux station is supported by TERN and the DCCEE through the ACCSP.
The purpose of the Tumbarumba flux station is to:
- study the ecophysiological processes and rates of carbon accumulation of a commercially important, high-productivity forest
- measure the exchanges of carbon dioxide, water vapour and energy between the forest and the atmosphere using micrometeorological techniques
- develop new data analysis and interpretation methods for micrometeorology in complex terrain which will contribute significantly to the discipline of micrometeorology since much of the world's forests are located in complex terrain, where classical techniques may not be suitable
- utilize the ecophysiological and micrometeorological measurements to test models of plant and canopy function, such as the acclimation of photosynthetic capacity to temperature variations with season and the response of stomata to drought
- utilize the measurements to test land surface models such as the Community Atmosphere Biosphere Land Exchange model CA.
Data Quality Assessment Scope
local :
dataset
<br>Processing levels</br>
<br>Under each of the data release directories, the netcdf files are organised by processing levels (L3, L4, L5 and L6):<ul style="list-style-type: disc;">
<li>L3 (Level 3) processing applies a range of quality assurance/quality control measures (QA/QC) to the L1 data. The variable names are mapped to the standard variable names (CF 1.8) as part of this step. The L3 netCDF file is then the starting point for all further processing stages.</li>
<li>L4 (Level 4) processing fills gaps in the radiation, meteorological and soil quantities utilising AWS (automated weather station), ACCESS-G (Australian Community Climate and Earth-System Simulator) and ERA5 (the fifth generation ECMWF atmospheric reanalysis of the global climate).</li>
<li>L5 (Level 5) processing fills gaps in the flux data employing the artificial neural network SOLO (self-organising linear output map).</li>
<li>L6 (Level 6) processing partitions the gap-filled NEE into GPP and ER.</li></ul>
Each processing level has two sub-folders ‘default’ and ‘site_pi’:<ul style="list-style-type: disc;">
<li>default: contains files processed using PyFluxPro</li>
<li>site_pi: contains files processed by the principal investigators of the site.</li></ul>
If the data quality is poor, the data is filled from alternative sources. Filled data can be identified by the Quality Controls flags in the dataset. Quality control checks include: <ul style="list-style-type: disc;">
<li>range checks for plausible limits</li>
<li>spike detection</li>
<li>dependency on other variables</li>
<li>manual rejection of date ranges</li></ul>
Specific checks applied to the sonic and IRGA data include rejection of points based on the sonic and IRGA diagnostic values and on either automatic gain control (AGC) or CO<sub>2</sub> and H<sub>2</sub>O signal strength, depending upon the configuration of the IRGA.</br>
Created: 2002-01-07
Issued: 2024-05-04
Modified: 2024-05-07
Data time period: 2002-01-07
text: Bago State forest, south eastern New South Wales, Australia.
User Contributed Tags
Login to tag this record with meaningful keywords to make it easier to discover
Point-of-truth metadata URL
Isaac P., Cleverly J., McHugh I., van Gorsel E., Ewenz C. and Beringer, J. (2017). OzFlux data: network integration from collection to curation, Biogeosciences, 14: 2903-2928
doi :
https://doi.org/10.5194/bg-14-2903-2017
PyFluxPro
- URI : geonetwork.tern.org.au/geonetwork/srv/eng/catalog.search#/metadata/291cddd9-23f6-4811-ab66-aab95490aa34
- global : 291cddd9-23f6-4811-ab66-aab95490aa34