Brief description
This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.21) as described by Isaac et al. (2017) for the quality control and post-processing steps. The final, gap-filled product containing Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER) has been produced using the ONEFlux software as described in Pastorello et al (2020). This data set has been produced as part of the FLUXNET Shuttle project. The study was conducted in a 481 ha almond orchard located near Loxton in South Australia. The orchard was divided into 10 ha blocks (200 m by 500 m with the long axis aligned north–south) and the flux tower was situated at 34.47035°S and 140.65512°E near the middle of the northern half of a block of trees. The topography of the site was slightly undulating and the area around the tower had a slope of less than 1.5°. The orchard was planted in 2000 with an inter-row spacing of 7 m and a within row spacing of 5 m. Tree height in August 2008 was 5.5 m. The study block consists of producers, Nonpareil, planted every other row, and pollinators planted as alternating rows of Carmel, Carmel and Peerless, and Carmel and Price. All varieties were planted on Nemaguard rootstock. All but 31 ha of the surrounding orchard was planted between 1999 and 2002.
Lineage
Data collected using standard eddy covariance and meteorological instrumentation on a 10m tower at the Loxton site. The data were quality controlled using the PyFluxPro software package, see Isaac et al (2017), which is available at https://github.com/OzFlux/PyFluxPro. Gap filling and partitioning has been done using the ONEFlux software package, see Pastorello et al 2020, which is available at https://github.com/fluxnet/ONEFlux.Data Creation
Data is measured using standard micro-meteorological instrumentation on a flux tower.
Data is recorded on a data logger and is collected by the site PI.
Data quality control including removal of data outside plausible ranges, removal of spikes, exclusion of particular date ranges and removal of data based on the dependence of one variable on another is done using PyFluxPro.
Filtering for low-ustar conditions, gap filling and partitioning of NEE into GPP and ER are done using ONEFlux.
Notes
CreditWe at TERN acknowledge the Traditional Owners and Custodians throughout Australia, New Zealand and all nations. We honour their profound connections to land, water, biodiversity and culture and pay our respects to their Elders past, present and emerging.
The purpose of the Loxton flux station is to measure the water use of about 4 ha of mature high-yielding almond trees. The study area was surrounded by almonds undergoing a similar irrigation regime. Ancillary measures of orchard canopy size; water, nutrient and salinity status, and climate were also collected. Two of the weaknesses in this approach, uncertainty about the origin of fluxes and lack of energy balance closure, were addressed by calculating monthly flux footprints and deriving ET from fluxes which have been adjusted to close the energy balance.
Data Quality Assessment Scope
local :
dataset
The data have been quality controlled using the PyFluxPro software. Quality control checks applied to the data include:<ul style="list-style-type: disc;">
<li>range checks for plausible limits</li>
<li>spike detection and removal</li>
<li>dependency on other variables</li>
<li>manual rejection of date ranges</li></ul>
<br>
Specific checks applied to the sonic and IRGA data including rejection of points based on the sonic and IRGA diagnostic values and on either automatic gain control (AGC) or CO2 and H2O signal strength, depending upon the configuration of the IRGA.</br>
<br>If the data quality is poor, the meteorological data is filled from ERA5 reanalysis data and fluxes are filled using the Marginal Distribution Sampling method. Filled data can be identified by the Quality Controls flags in the dataset. </br>
<br>The ONEFlux software used to gap fill and partition this data set also applies a Median Absolute Deviation (MAD) filter to the carbon dioxide, latent heat and sensible heat before the gap filling step.</br>
Isaac P., Cleverly J., McHugh I., van Gorsel E., Ewenz C. and Beringer, J. (2017). OzFlux data: network integration from collection to curation, Biogeosciences, 14: 2903-2928
doi :
https://doi.org/10.5194/bg-14-2903-2017
Data Quality Assessment Result
local :
Quality Result
No anomalous data detected after quality control.
Created: 2025-12-11
Issued: 2026-03-25
Modified: 2026-03-25
Data time period: 2008-08-19 to 2009-06-09
text: The Loxton flux tower is located in the Riverland region of South Australia.
User Contributed Tags
Login to tag this record with meaningful keywords to make it easier to discover
Point-of-truth metadata URL
Isaac P., Cleverly J., McHugh I., van Gorsel E., Ewenz C. and Beringer, J. (2017). OzFlux data: network integration from collection to curation, Biogeosciences, 14: 2903-2928
doi :
https://doi.org/10.5194/bg-14-2903-2017
PyFluxPro
uri :
https://github.com/OzFlux/PyFluxPro
ONEFlux
uri :
https://github.com/fluxnet/ONEFlux
Pastorello, G., Trotta, C., Canfora, E. et al. The FLUXNET2015 dataset and the ONEFlux processing pipeline for eddy covariance data. Sci Data 7, 225 (2020).
- URI : geonetwork.tern.org.au/geonetwork/srv/eng/catalog.search#/metadata/48a34a9d-0147-478e-93ec-eab9f14c2bdc
- global : 48a34a9d-0147-478e-93ec-eab9f14c2bdc
