Data

Lizard Island Sensor Float 2

Name: Lizard Island Sensor Float 2
Published: 2026

Australian Institute of Marine Science

Australian Institute of Marine Science (AIMS) ; Integrated Marine Observing System (IMOS)

Viewed: [[ro.stat.viewed]] Cited: [[ro.stat.cited]] Accessed: [[ro.stat.accessed]]

ctx_ver=Z39.88-2004&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Adc&rfr_id=info%3Asid%2FANDS&rft_id=https://apps.aims.gov.au/metadata/view/1b1a38d8-ed30-43c2-9e0a-b3ce8403672d&rft.title=Lizard Island Sensor Float 2&rft.identifier=https://apps.aims.gov.au/metadata/view/1b1a38d8-ed30-43c2-9e0a-b3ce8403672d&rft.publisher=Australian Institute of Marine Science (AIMS)&rft.description=A round 1.4m yellow buoy has been deployed in the southern part of the main lagoon of Lizard Island to the east of Palfrey Island.The buoy is configured as a sensor-float with a Campbell Scientific logger, spread-spectrum radio and 2.4/5 GHz 802.11 wireless for communicating with the base station (located at the workshop near the Research Station) a surface mounted (60cm under the water surface) thermistor and an inductive modem to support a range of inductive sensors, initially this will be a SeaBird SBE39 measuring temperature and pressure (depth) and a SeaBird SBE37 measuring conductivity (salinity), temperature and depth.As of August 2010 the inductive sensors are located along a 30m cable that runs north into the main lagoon with a SBE39 located at the base of the buoy and the SBE37 at the end of the sensor run.The unit will be serviced every six months and will be used in the future for attaching new sets of sensors. The buoy is one of four buoys and two relay-poles being deployed on Lizard Island as part of the GBROOS Project. The design looks to measure the water within the lagoon as well as water impinging onto the reef and potentially any upwelling or movement of warm water that may cause thermal stress such as coral bleaching. The buoys initially have a Campbell Scientific loggers powered off four 5W solar panels, a wind turbine and one thermistor located at the base of the buoy around 60cm below the water line. The buoys use a Campbell Scientific spread-spectrum radio as well as 802.11 Wi-Fi to talk back to Relay Pole 2 and then to Replay-Pole 1 and then to the Base Station.Maintenance and Update Frequency: asNeededStatement: Statement: All sensors are factory calibrated and serviced every six months.Statement: Data are checked against a set of rules and then flagged using the IODE set of flags.&rft.creator=Australian Institute of Marine Science (AIMS) &rft.creator=Integrated Marine Observing System (IMOS) &rft.date=2026&rft.coverage=westlimit=145.45705; southlimit=-14.694067; eastlimit=145.45705; northlimit=-14.694067&rft.coverage=westlimit=145.45705; southlimit=-14.694067; eastlimit=145.45705; northlimit=-14.694067&rft_rights=Creative Commons Attribution 3.0 Australia License http://creativecommons.org/licenses/by/3.0/au/&rft_rights=Use Limitation: All AIMS data, products and services are provided as is and AIMS does not warrant their fitness for a particular purpose or non-infringement. While AIMS has made every reasonable effort to ensure high quality of the data, products and services, to the extent permitted by law the data, products and services are provided without any warranties of any kind, either expressed or implied, including without limitation any implied warranties of title, merchantability, and fitness for a particular purpose or non-infringement. AIMS make no representation or warranty that the data, products and services are accurate, complete, reliable or current. To the extent permitted by law, AIMS exclude all liability to any person arising directly or indirectly from the use of the data, products and services.&rft_rights=Attribution: Format for citation of metadata sourced from Australian Institute of Marine Science (AIMS) in a list of reference is as follows: Australian Institute of Marine Science (AIMS). (2017). Northern Australia Automated Marine Weather and Oceanographic Stations, Sites: [Lizard Island]. https://doi.org/10.25845/5c09bf93f315d, accessed[date-of-access].&rft_subject=oceans&rft.type=dataset&rft.language=English Access the data

Access data via landing page
https://apps.aims.gov....

Cite Saved to MyRDA Save to MyRDA

Licence & Rights:

Open Licence view details

Creative Commons Attribution 3.0 Australia License
http://creativecommons.org/licenses/by/3.0/au/

Use Limitation: All AIMS data, products and services are provided "as is" and AIMS does not warrant their fitness for a particular purpose or non-infringement. While AIMS has made every reasonable effort to ensure high quality of the data, products and services, to the extent permitted by law the data, products and services are provided without any warranties of any kind, either expressed or implied, including without limitation any implied warranties of title, merchantability, and fitness for a particular purpose or non-infringement. AIMS make no representation or warranty that the data, products and services are accurate, complete, reliable or current. To the extent permitted by law, AIMS exclude all liability to any person arising directly or indirectly from the use of the data, products and services.

Attribution: Format for citation of metadata sourced from Australian Institute of Marine Science (AIMS) in a list of reference is as follows: "Australian Institute of Marine Science (AIMS). (2017). Northern Australia Automated Marine Weather and Oceanographic Stations, Sites: [Lizard Island]. https://doi.org/10.25845/5c09bf93f315d, accessed[date-of-access]".

Access:

Other

Full description

A round 1.4m yellow buoy has been deployed in the southern part of the main lagoon of Lizard Island to the east of Palfrey Island.The buoy is configured as a sensor-float with a Campbell Scientific logger, spread-spectrum radio and 2.4/5 GHz 802.11 wireless for communicating with the base station (located at the workshop near the Research Station) a surface mounted (60cm under the water surface) thermistor and an inductive modem to support a range of inductive sensors, initially this will be a SeaBird SBE39 measuring temperature and pressure (depth) and a SeaBird SBE37 measuring conductivity (salinity), temperature and depth.As of August 2010 the inductive sensors are located along a 30m cable that runs north into the main lagoon with a SBE39 located at the base of the buoy and the SBE37 at the end of the sensor run.The unit will be serviced every six months and will be used in the future for attaching new sets of sensors.
The buoy is one of four buoys and two relay-poles being deployed on Lizard Island as part of the GBROOS Project. The design looks to measure the water within the lagoon as well as water impinging onto the reef and potentially any upwelling or movement of warm water that may cause thermal stress such as coral bleaching. The buoys initially have a Campbell Scientific loggers powered off four 5W solar panels, a wind turbine and one thermistor located at the base of the buoy around 60cm below the water line. The buoys use a Campbell Scientific spread-spectrum radio as well as 802.11 Wi-Fi to talk back to Relay Pole 2 and then to Replay-Pole 1 and then to the Base Station.

Lineage

Maintenance and Update Frequency: asNeeded

Statement: Statement: All sensors are factory calibrated and serviced every six months.Statement: Data are checked against a set of rules and then flagged using the IODE set of flags.

Notes

Credit
Bainbridge, Scott, Mr (Point Of Contact)

Modified: 11 09 2026

This dataset is part of a larger collection

Click to explore relationships graph

text: westlimit=145.45705; southlimit=-14.694067; eastlimit=145.45705; northlimit=-14.694067

Subjects

oceans |

User Contributed Tags

Other Information

global : efc69c33-528f-4853-99aa-74d73e0daffa

Identifiers

global : 1b1a38d8-ed30-43c2-9e0a-b3ce8403672d