Data

Southern Surveyor Voyage SS 09/2004 HPLC Pigment and Ocean Colour Data

Integrated Marine Observing System
CSIRO O&A, Information & Data Centre (Point of contact) Clementson, Lesley (Point of contact)
Viewed: [[ro.stat.viewed]] Cited: [[ro.stat.cited]] Accessed: [[ro.stat.accessed]]
ctx_ver=Z39.88-2004&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Adc&rfr_id=info%3Asid%2FANDS&rft_id=https://marlin.csiro.au/geonetwork/srv/eng/catalog.search#/metadata/dbb7bf86-9ed3-0f97-e043-08114f8cc2ac&rft.title=Southern Surveyor Voyage SS 09/2004 HPLC Pigment and Ocean Colour Data&rft.identifier=Anzlic Identifier: ANZCW0306014198&rft.publisher=Integrated Marine Observing System&rft.description=This record contains data collected on the RV Southern Surveyor, north of the Tasman Sea, between 15 and 27 September 2004. The data can be used for Ocean Colour sensor validation. Parameters measured are the concentration of chlorophyll and carotenoid pigments and retrieved chlorophyll a estimate. The data was used primarily to validate ocean colour sensors MERIS, MODIS and SeaWIFs and the SST sensor AATSR. Samples were collected and analysed for pigments.Progress Code: completedMaintenance and Update Frequency: notPlannedStatement: Water samples were taken on-board the vessel and stored under cool and dark conditions until filtering took place on land.Samples were analysed and QC procedures were carried out in the Ocean Colour Laboratory. Pigment analysis 4 litres of sample water was filtered through a 47 mm glass fibre filter (Whatman GF/F) and then stored in liquid nitrogen until analysis. To extract the pigments, the filters were cut into small pieces and covered with 100% acetone (3 mls) in a 10 ml centrifuge tube. The samples were vortexed for about 30 seconds and then sonicated for 15 minutes in the dark. The samples were then kept in the dark at 4 °C for approximately 15 hours. After this time 200 µL water was added to the acetone such that the extract mixture was 90:10 acetone:water (vol:vol) and sonicated once more for 15 minutes. The extracts were centrifuged to remove the filter paper and then filtered through a 0.2 µm membrane filter (Whatman, anatope) prior to analysis by HPLC using a Waters Alliance high performance liquid chromatography system, comprising a 2695XE separations module with column heater and refrigerated autosampler and a 2996 photo-diode array detector. Immediately prior to injection the sample extract was mixed with a buffer solution (90:10 28 mM tetrabutyl ammonium acetate, pH 6.5 : methanol) within the sample loop. Pigments were separated using a Zorbax Eclipse XDB-C8 stainless steel 150 mm x 4.6 mm ID column with 3.5 µm particle size (Agilent Technologies) with gradient elution as described in Van Heukelem and Thomas (2001). The separated pigments were detected at 436 nm and identified against standard spectra using Waters Empower software. Concentrations of pigments were determined from standards (Sigma, USA or DHI, Denmark). Spectral absorption 4 litres of sample water was filtered through a 25 mm glass fibre filter (Whatman GF/F) and the filter then stored flat in liquid nitrogen until analysis. Optical density spectra for total particulate matter were obtained using a GBC 916 UV/VIS dual beam spectrophotometer equipped with an integrating sphere&rft.creator=Anonymous&rft.date=2013&rft.coverage=westlimit=153.8; southlimit=-28.6; eastlimit=161.2; northlimit=-25.9&rft.coverage=westlimit=153.8; southlimit=-28.6; eastlimit=161.2; northlimit=-25.9&rft.coverage=uplimit=-2; downlimit=-100&rft.coverage=uplimit=-2; downlimit=-100&rft_rights=Data is made available under a Creative Commons Attribution 4.0 International Licence, please see link. Data is supplied 'as is' without any warranty or guarantee except as required by law to be given to you. The data may not be free of error, comprehensive, current or appropriate for your particular purpose. You accept all risk and responsibility for its use. ATTRIBUTION STATEMENT: The dataset [Insert-dataset-name-here] downloaded on [Insert-DD-Mmm-YYYY-here] was collected on voyage [Insert-voyage-name-here] by the Marine National Facility.&rft_subject=oceans&rft_subject=Earth Science | Oceans | Ocean Chemistry | Chlorophyll&rft_subject=Earth Science | Oceans | Ocean Chemistry | Pigments&rft_subject=Earth Science | Oceans | Ocean Optics | Ocean Color&rft_subject=Earth Science | Terrestrial Hydrosphere | Water Quality/Water Chemistry | Chlorophyll&rft_subject=CTDs (Conductivity-Temperature-Depth Profilers)&rft_subject=Fluorometers&rft_subject=HPLC (High Performance Liquid Chromatography)&rft_subject=Niskin Bottles&rft_subject=Spectrophotometers&rft_subject=Coastal Waters (Australia) | Queensland Coast, QLD&rft_subject=Regional Seas | Coral Sea&rft_subject=Research Voyage: SS 09/2004&rft_subject=Determining ecological effects of longline fishing in the eastern tuna and billfish fishery&rft_subject=Ship: Southern Surveyor&rft_subject=Practical salinity of the water body&rft_subject=Temperature of the water body&rft_subject=Pressure (measured variable) in the water body exerted by overlying sea water and any medium above it&rft_subject=Pressure (measured variable) in the water body exerted by overlying sea water only&rft_subject=CTD&rft_subject=research vessel&rft.type=dataset&rft.language=English Access the data
Cite Saved to MyRDA Save to MyRDA

Licence & Rights:

view details

Data is made available under a Creative Commons Attribution 4.0 International Licence, please see link. Data is supplied 'as is' without any warranty or guarantee except as required by law to be given to you. The data may not be free of error, comprehensive, current or appropriate for your particular purpose. You accept all risk and responsibility for its use. ATTRIBUTION STATEMENT: The dataset [Insert-dataset-name-here] downloaded on [Insert-DD-Mmm-YYYY-here] was collected on voyage [Insert-voyage-name-here] by the Marine National Facility.

Access:

Other

Brief description

This record contains data collected on the RV Southern Surveyor, north of the Tasman Sea, between 15 and 27 September 2004. The data can be used for Ocean Colour sensor validation. Parameters measured are the concentration of chlorophyll and carotenoid pigments and retrieved chlorophyll a estimate. The data was used primarily to validate ocean colour sensors MERIS, MODIS and SeaWIFs and the SST sensor AATSR. Samples were collected and analysed for pigments.

Lineage

Progress Code: completed
Maintenance and Update Frequency: notPlanned
Statement: Water samples were taken on-board the vessel and stored under cool and dark conditions until filtering took place on land.Samples were analysed and QC procedures were carried out in the Ocean Colour Laboratory. Pigment analysis 4 litres of sample water was filtered through a 47 mm glass fibre filter (Whatman GF/F) and then stored in liquid nitrogen until analysis. To extract the pigments, the filters were cut into small pieces and covered with 100% acetone (3 mls) in a 10 ml centrifuge tube. The samples were vortexed for about 30 seconds and then sonicated for 15 minutes in the dark. The samples were then kept in the dark at 4 °C for approximately 15 hours. After this time 200 µL water was added to the acetone such that the extract mixture was 90:10 acetone:water (vol:vol) and sonicated once more for 15 minutes. The extracts were centrifuged to remove the filter paper and then filtered through a 0.2 µm membrane filter (Whatman, anatope) prior to analysis by HPLC using a Waters Alliance high performance liquid chromatography system, comprising a 2695XE separations module with column heater and refrigerated autosampler and a 2996 photo-diode array detector. Immediately prior to injection the sample extract was mixed with a buffer solution (90:10 28 mM tetrabutyl ammonium acetate, pH 6.5 : methanol) within the sample loop. Pigments were separated using a Zorbax Eclipse XDB-C8 stainless steel 150 mm x 4.6 mm ID column with 3.5 µm particle size (Agilent Technologies) with gradient elution as described in Van Heukelem and Thomas (2001). The separated pigments were detected at 436 nm and identified against standard spectra using Waters Empower software. Concentrations of pigments were determined from standards (Sigma, USA or DHI, Denmark). Spectral absorption 4 litres of sample water was filtered through a 25 mm glass fibre filter (Whatman GF/F) and the filter then stored flat in liquid nitrogen until analysis. Optical density spectra for total particulate matter were obtained using a GBC 916 UV/VIS dual beam spectrophotometer equipped with an integrating sphere

Notes

Credit
Jock Young
Credit
Lesley Clementson
Credit
Pru Bonham

Data time period: 2004-09-15 to 2004-09-27

This dataset is part of a larger collection

Click to explore relationships graph
Help

Related Data

Related Organisations

Related People

Related Services

161.2,-25.9 161.2,-28.6 153.8,-28.6 153.8,-25.9 161.2,-25.9

157.5,-27.25

text: westlimit=153.8; southlimit=-28.6; eastlimit=161.2; northlimit=-25.9

text: uplimit=-2; downlimit=-100

Subjects
CTD | CTDs (Conductivity-Temperature-Depth Profilers) | Coastal Waters (Australia) | Queensland Coast, QLD | Determining ecological effects of longline fishing in the eastern tuna and billfish fishery | Earth Science | Oceans | Ocean Chemistry | Chlorophyll | Earth Science | Oceans | Ocean Chemistry | Pigments | Earth Science | Oceans | Ocean Optics | Ocean Color | Earth Science | Terrestrial Hydrosphere | Water Quality/Water Chemistry | Chlorophyll | Fluorometers | HPLC (High Performance Liquid Chromatography) | Niskin Bottles | Practical salinity of the water body | Pressure (measured variable) in the water body exerted by overlying sea water and any medium above it | Pressure (measured variable) in the water body exerted by overlying sea water only | Regional Seas | Coral Sea | Research Voyage: SS 09/2004 | Ship: Southern Surveyor | Spectrophotometers | Temperature of the water body | oceans | research vessel |

User Contributed Tags    

Login to tag this record with meaningful keywords to make it easier to discover

Other Information
Access all data - Australian-waters Earth Observation Phytoplankton-type Products (AEsOP) (Data Link)

uri : https://aesop.csiro.au/

Data also available via IMOS and AODN portal (Data Link)

uri : https://portal.aodn.org.au/

Marine National Facility (Documentation Link)

uri : https://mnf.csiro.au/

This work is licensed under a Creative Commons Attribution 4.0 International License (Documentation Link)

uri : https://creativecommons.org/licenses/by/4.0/

Identifiers
  • Local : Anzlic Identifier: ANZCW0306014198
  • Local : Marlin Record Number: 14198
  • global : dbb7bf86-9ed3-0f97-e043-08114f8cc2ac
Similar data you may be interested in: