Brief description
This record describes Hydrology (HYD) data collected from the Marine National Facility (MNF) RV Investigator voyage IN2019_V07, titled:titled "RAN Hydrographic and Maritime Heritage Surveys. " The voyage took place from Hobart (TAS) to Hobart between April 11 and April 23, 2019.Hydrology samples were collected from Niskin bottles sampled at various depths during Conductivity-Temperature-Depth (CTD) deployments. Parameters analysed were salinity, dissolved oxygen, phosphate, silicate, nitrate plus nitrite and ammonium.
This dataset has been archived at the CSIRO O&A Information and Data Centre (IDC) in Hobart. Additional information regarding this dataset is contained in the Voyage Report and Data Processing Report.
Lineage
Progress Code: completed
Statement: Data source: original field data.
Nutrient samples were analysed using segmented flow SEAL AA3 and results are in µmol/L. In-house methods SOP 001, SOP 002, SOP 003 and SOP 004 were used to analyse nutrients.
Please cite the following paper when using Hydrochemistry data for silicate, phosphate, nitrate+nitrite (NOx) and nitrite analysis:
Rees, C., L. Pender, K. Sherrin, C. Schwanger, P. Hughes, S. Tibben, A. Marouchos, and M. Rayner. 2018. Methods for reproducible shipboard SFA nutrient measurement using RMNS and automated data processing. Limnol. Oceanogr: Methods Doi:10.1002/Iom3.10294
Salinities were analysed using Guildline 8400B Autosal Lab Salinometer and OSIL software. The salinometer was calibrated with IAPSO standard seawater P162. In-house method SOP 006 was used to analyse salinity, units are Practical Salinity Unit (PSU).
Dissolved Oxygens were analysed using Scripps UV titrator and software, units measured in ml/L and converted to µmol/L. Dissolved oxygen was analysed using in-house method SOP 005.
All data was processed with HyPro 5.7 on the ship and re-processed on shore with HyPro 5.7.
Nutrient data decimal places within the CSV file; silicate is 1 decimal place, nitrite is 3 decimal places and NOx (nitrate + nitrite), phosphate and ammonium is 2 decimal places. Previously values below detection limit were set to zero these values are now displayed as the measured value even if that is a negative value. Oxygen Data is displayed to 3 decimal places. Salinity data is displayed to 4 decimal places, prior to in2018_t01 voyage it was 3 decimal places in the csv file.
Data processing notes are in the process report (in2019_v07_HYD_ProcessingReport.pdf).
Nutrient samples were analysed using segmented flow SEAL AA3 and results are in µmol/L. In-house methods SOP 001, SOP 002, SOP 003 and SOP 004 were used to analyse nutrients.
Please cite the following paper when using Hydrochemistry data for silicate, phosphate, nitrate+nitrite (NOx) and nitrite analysis:
Rees, C., L. Pender, K. Sherrin, C. Schwanger, P. Hughes, S. Tibben, A. Marouchos, and M. Rayner. 2018. Methods for reproducible shipboard SFA nutrient measurement using RMNS and automated data processing. Limnol. Oceanogr: Methods Doi:10.1002/Iom3.10294
Salinities were analysed using Guildline 8400B Autosal Lab Salinometer and OSIL software. The salinometer was calibrated with IAPSO standard seawater P162. In-house method SOP 006 was used to analyse salinity, units are Practical Salinity Unit (PSU).
Dissolved Oxygens were analysed using Scripps UV titrator and software, units measured in ml/L and converted to µmol/L. Dissolved oxygen was analysed using in-house method SOP 005.
All data was processed with HyPro 5.7 on the ship and re-processed on shore with HyPro 5.7.
Nutrient data decimal places within the CSV file; silicate is 1 decimal place, nitrite is 3 decimal places and NOx (nitrate + nitrite), phosphate and ammonium is 2 decimal places. Previously values below detection limit were set to zero these values are now displayed as the measured value even if that is a negative value. Oxygen Data is displayed to 3 decimal places. Salinity data is displayed to 4 decimal places, prior to in2018_t01 voyage it was 3 decimal places in the csv file.
Data processing notes are in the process report (in2019_v07_HYD_ProcessingReport.pdf).
Notes
CreditThis data was collected by participants on the Marine National Facility (MNF) RV Investigator voyage IN2019_V07.
Credit
The data was processed by Stephen Tibben and Jack McDonald (CSIRO O&A).
The data was processed by Stephen Tibben and Jack McDonald (CSIRO O&A).
text: westlimit=146.5; southlimit=-43.3; eastlimit=149.7; northlimit=-38.1; projection=WGS 84 (EPSG:4326)
Subjects
Ammonia |
CTD |
CTDs (Conductivity-Temperature-Depth Profilers) |
Coastal Waters (Australia) | Tasmania Coast West, TAS |
Coastal Waters (Australia) | Victoria Coast, VIC |
EARTH SCIENCE |
Global / Oceans | Southern Ocean |
Marine Features (Australia) | Bass Strait, TAS/VIC |
Marine Features (Australia) | Derwent Estuary, TAS |
Marine Features (Australia) | Great Australian Bight, SA/WA |
Marine National Facility |
Nitrate |
Nitrite |
Nutrients |
Niskin Bottles |
Nutrient Analysers |
OCEAN CHEMISTRY |
OCEAN TEMPERATURE |
OCEANS |
Oxygen |
Phosphate |
Practical salinity of the water body |
Pressure (measured variable) in the water body exerted by overlying sea water and any medium above it |
Pressure (measured variable) in the water body exerted by overlying sea water only |
RAN Hydrographic and Maritime Heritage Surveys |
Research Voyage: IN2019_V07 |
Salinity |
SALINITY/DENSITY |
Silicate |
Ship: Investigator (RV) |
Temperature of the water body |
Water Temperature |
oceans |
research vessel |
User Contributed Tags
Login to tag this record with meaningful keywords to make it easier to discover
Other Information
Link to the Marine National Facility Homepage (Marine National Facility)
uri :
https://mnf.csiro.au/
Link to Data License / Attribution statements (Data Licensing)
Identifiers
- global : f75f751d-20b1-4b17-986c-43e245c141bb
