Data
Viewed: [[ro.stat.viewed]] Cited: [[ro.stat.cited]] Accessed: [[ro.stat.accessed]]
ctx_ver=Z39.88-2004&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Adc&rfr_id=info%3Asid%2FANDS&rft_id=http://marlin.csiro.au/geonetwork/srv/api/records/2e3b8853-e8e5-403c-abc9-445039967799&rft.title=RV Investigator Voyage IN2026_V01 CTD Data&rft.identifier=2e3b8853-e8e5-403c-abc9-445039967799&rft.publisher=Australian Ocean Data Network&rft.description=This record describes the CTD data collected on Investigator voyage IN2026_V01, titled: Cook Ice Ecosystems and Sediments (COOKIES). The voyage took place between January 02, 2026 and February 25, 2026 (AEST), departing from Hobart and returning to Hobart.Data for 37 CTD deployments were acquired using the Sea-Bird SBE911 CTD unit #24, fitted with 36 twelve-litre bottles on the rosette sampler. Sea-Bird-supplied calibration factors were used to compute the pressures and preliminary conductivity values. CSIRO-supplied calibrations were applied to the temperature data. The data were subjected to automated QC to remove spikes and out-of-range values.37 CTD casts were performed. A Benthic CTD camera was attached to the CTD to observe seafloor approximately ~4 m off bottom. Waiting 20 seconds after camera before firing bottom bottles as they use the same channels.Cast summary:• #1 – primary sensor channel had blockage, cleared ¾ on way down• #2 – primary sensor blockage on way down• #21, 22, 23 – yoyo casts to 600m – No bottles firedThe final conductivity calibration was based on a single deployment grouping. There were no changes to the sensors used throughout the voyage. The final calibration from the secondary sensor had a standard deviation (SD) of 0.00128 PSU, well within our target of ‘better than 0.002 PSU’. The standard product of 1-decibar binned averages were produced using data from the secondary sensors.The dissolved oxygen data calibration fit had a SD of 0.8692μM. The agreement between the CTD and bottle data was good.PAR, CDOM, transmissometer, Chlorophyll-A, and Backscatter sensors were also installed on the auxiliary A/D channels of the CTD.The collected data were processed (quality-controlled), and subsequently archived by the CSIRO National Collections and Marine Infrastructure (NCMI) Information and Data Centre (IDC).Additional information regarding this dataset may be contained in the Voyage Summary and the Data Processing Report.Maintenance and Update Frequency: asNeededStatement: Original field data. Data processing and quality control by the MNF Data Acquisition and Processing Group. Data archived by the CSIRO NCMI Information and Data Centre.&rft.creator=Anonymous&rft.date=2026&rft.coverage=westlimit=65.00; southlimit=-65.00; eastlimit=185.00; northlimit=-9.00; projection=WGS 84 (EPSG:4326)&rft.coverage=westlimit=65.00; southlimit=-65.00; eastlimit=185.00; northlimit=-9.00; projection=WGS 84 (EPSG:4326)&rft_rights=Attribution 4.0 https://creativecommons.org/licenses/by/4.0/&rft_rights=&rft_rights=Data are made available under a Creative Commons Attribution 4.0 International Licence, please see link. Data are supplied 'as is' without any warranty or guarantee except as required by law to be given to you. The data may not be free of error, comprehensive, current or appropriate for your particular purpose. You accept all risk and responsibility for their use. ATTRIBUTION STATEMENT: We acknowledge the use of the CSIRO Marine National Facility (https://ror.org/01mae9353) in undertaking this research. The dataset [Insert-dataset-name-here] downloaded on [Insert-DD-Mmm-YYYY-here] was collected on voyage [Insert-voyage-name-here] by the Marine National Facility.&rft_subject=oceans&rft_subject=Earth Science | Oceans | Ocean Pressure | Water Pressure&rft_subject=Earth Science | Oceans | Salinity/Density | Salinity&rft_subject=Earth Science | Oceans | Ocean Temperature | Water Temperature&rft_subject=Marine National Facility&rft_subject=Research Voyage: IN2026_V01&rft_subject=Vessel Data: CTD&rft_subject=Ship: Investigator (RV)&rft_subject=Cook Ice Ecosystems and Sediments (COOKIES)&rft_subject=States, Territories (Australia) | Australian Antarctic Territory&rft_subject=Global / Oceans | Southern Ocean&rft_subject=Coastal Waters (Australia) | Tasmania Coast, TAS&rft_subject=Marine Features (Australia) | Derwent Estuary, TAS&rft_subject=CTDs (Conductivity-Temperature-Depth Profilers)&rft.type=dataset&rft.language=English Access the data

Licence & Rights:

Open Licence view details
CC-BY

Attribution 4.0
https://creativecommons.org/licenses/by/4.0/

Data are made available under a Creative Commons Attribution 4.0 International Licence, please see link. Data are supplied 'as is' without any warranty or guarantee except as required by law to be given to you. The data may not be free of error, comprehensive, current or appropriate for your particular purpose. You accept all risk and responsibility for their use. ATTRIBUTION STATEMENT: We acknowledge the use of the CSIRO Marine National Facility (https://ror.org/01mae9353) in undertaking this research. The dataset [Insert-dataset-name-here] downloaded on [Insert-DD-Mmm-YYYY-here] was collected on voyage [Insert-voyage-name-here] by the Marine National Facility.

Access:

Other

Full description

This record describes the CTD data collected on Investigator voyage IN2026_V01, titled: "Cook Ice Ecosystems and Sediments (COOKIES)." The voyage took place between January 02, 2026 and February 25, 2026 (AEST), departing from Hobart and returning to Hobart.

Data for 37 CTD deployments were acquired using the Sea-Bird SBE911 CTD unit #24, fitted with 36 twelve-litre bottles on the rosette sampler. Sea-Bird-supplied calibration factors were used to compute the pressures and preliminary conductivity values. CSIRO-supplied calibrations were applied to the temperature data. The data were subjected to automated QC to remove spikes and out-of-range values.

37 CTD casts were performed. A Benthic CTD camera was attached to the CTD to observe seafloor approximately ~4 m off bottom. Waiting 20 seconds after camera before firing bottom bottles as they use the same channels.

Cast summary:
• #1 – primary sensor channel had blockage, cleared ¾ on way down
• #2 – primary sensor blockage on way down
• #21, 22, 23 – yoyo casts to 600m – No bottles fired

The final conductivity calibration was based on a single deployment grouping. There were no changes to the sensors used throughout the voyage. The final calibration from the secondary sensor had a standard deviation (SD) of 0.00128 PSU, well within our target of ‘better than 0.002 PSU’. The standard product of 1-decibar binned averages were produced using data from the secondary sensors.

The dissolved oxygen data calibration fit had a SD of 0.8692μM. The agreement between the CTD and bottle data was good.
PAR, CDOM, transmissometer, Chlorophyll-A, and Backscatter sensors were also installed on the auxiliary A/D channels of the CTD.
The collected data were processed (quality-controlled), and subsequently archived by the CSIRO National Collections and Marine Infrastructure (NCMI) Information and Data Centre (IDC).

Additional information regarding this dataset may be contained in the Voyage Summary and the Data Processing Report.

Lineage

Maintenance and Update Frequency: asNeeded
Statement: Original field data. Data processing and quality control by the MNF Data Acquisition and Processing Group. Data archived by the CSIRO NCMI Information and Data Centre.

Notes

Credit
CTD data processed by Steven Van Graas, Ella Pietraroia and Kieran Sheehan (CSIRO NCMI).
Credit
These data were collected on the Marine National Facility (MNF) RV Investigator voyage IN2026_V01
Credit
The MNF must be acknowledged in all outputs derived from Data and/or Samples collected by, or with support from, the MNF. Acknowledge the MNF in outputs with the statement: “We acknowledge the use of the CSIRO Marine National Facility (https://ror.org/01mae9353 ) in undertaking this research.” Acknowledgment and citations should be in all forms of publication including presentations (where the acknowledgement should be on the closing slide), journals, books, reports and related research outputs.

This dataset is part of a larger collection

Click to explore relationships graph

Spatial Coverage And Location

text: westlimit=65.00; southlimit=-65.00; eastlimit=185.00; northlimit=-9.00; projection=WGS 84 (EPSG:4326)

Other Information
Download the Processing Report (PDF format) (Processing Report (PDF))

url : https://www.marine.csiro.au/data/reporting/get_file.cfm?eov_pub_id=3883

Link to Data available for this voyage via the Data Trawler (Data Trawler)

url : http://www.marine.csiro.au/data/trawler/dataset.cfm?survey=IN2026_V01&data_type=ctd

Download the CTD Data (NetCDF Format) (CTD Data (NetCDF))

url : https://www.marine.csiro.au/data/trawler/download.cfm?file_id=5790

Download the CTD Data (Matlab Format) (CTD Data (Matlab Format))

url : https://www.marine.csiro.au/data/trawler/download.cfm?file_id=5789

Download the CTD Data (CSV format) (CTD Data (CSV))

url : https://www.marine.csiro.au/data/trawler/download.cfm?file_id=5788

Link to RV Investigator Survey Information, including voyage plans and summaries (Investigator Survey)

url : https://www.marine.csiro.au/data/trawler/survey_details.cfm?survey=IN2026_V01

Link to the Marine National Facility Homepage (Marine National Facility)

url : https://mnf.csiro.au/

Identifiers
  • global : 2e3b8853-e8e5-403c-abc9-445039967799
ACN 633 798 857