Data
Viewed: [[ro.stat.viewed]] Cited: [[ro.stat.cited]] Accessed: [[ro.stat.accessed]]
ctx_ver=Z39.88-2004&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Adc&rfr_id=info%3Asid%2FANDS&rft_id=https://marlin.csiro.au/geonetwork/srv/eng/catalog.search#/metadata/b8b1a0f1-53cf-4ae8-818d-ef3eaaeb3bba&rft.title=RV Investigator Voyage IN2017_V01 CTD Data&rft.identifier=b8b1a0f1-53cf-4ae8-818d-ef3eaaeb3bba&rft.publisher=Australian Ocean Data Network&rft.description=This record describes the Conductivity-Temperature-Depth (CTD) data collected from the Marine National Facility RV Investigator voyage IN2017_V01 titled: Interactions of the Totten Glacier with the Southern Ocean through multiple glacial cycles. The voyage took place from Hobart (TAS) to Hobart between the 14th January and 5th March, 2017. Data for 33 deployments were acquired during this voyage using a Seabird SBE911 CTD, fitted with 36 twelve litre bottles on the rosette sampler. Casts 1-10, 13 – 33 were acquired using the Seabird SBE911 CTD unit 20, and casts 11 and 12 were acquired using the Seabird SBE911 CTD unit 22. CTD and sensors were changed in efforts to remediate sensor issues. CSIRO -supplied calibration factors were used to compute the pressures, and preliminary temperature and conductivity values. The data were subjected to automated QC to remove spikes and out-of-range values. Processing was completed using CapPro processing software, version 2.9. For the duration of the voyage significant spikes were observed across all recorded sensor channels. Investigation strongly suggests electrical interference was the cause of the data spikes, as mitigation measures have alleviated the issue. Care was taken in post processing to remove the spikes while maintaining true data features. The nature of the spiking was primarily extreme values persisting for a single scan, which were suitably detected and flagged by evaluating the second-difference of the data. An additional filter was also applied to the data which evaluated the median and standard deviation of the conductivity over a moving window, which was used to detect extreme changes in the sensor values characteristic of the noise induced spikes. The final conductivity calibration was based on two deployment groupings, due to sensor changes during the voyage. The final calibration for casts 1-13 from the secondary sensor had a standard deviation (S.D) of 0.0010393 PSU, within our target of ‘better than 0.002 PSU’. The final calibration for casts 14-33 from the secondary sensor had a standard deviation (S.D) of 0.0020084 PSU. The standard product of 1dbar binned averaged were produced using data from the secondary sensors. The final Oxygen calibration from the primary sensor had a S.D of 0.85991 uM. The agreement between the sensor and bottle data was good. Both Oxygen sensors calibrated closely. The Biospherical photosynthetically active radiation (PAR), Wetlabs Transmissometer, the Wetlabs ECO chlorophyll, and O&A IMU sensors were also installed on the auxiliary A/D channels of the CTD. The collected data were subsequently processed and archived within the CSIRO Oceans and Atmosphere (O&A) Information and Data Centre (IDC) in Hobart. Additional information regarding this dataset may be contained in the Voyage Summary and the CTD Data Processing Report.Maintenance and Update Frequency: asNeededStatement: Original field data. Data processing and quality control by the Marine National Facility Data Acquisition and Processing Group (DAP). Data processed and archived on 11/04/2018. Data were processed using the new CapPro system. For this voyage a moving window filter was applied to remove noise spikes from the Pressure, conductivity and oxygen sensor values.&rft.creator=Anonymous&rft.date=2015&rft.coverage=westlimit=114.9; southlimit=-65.68; eastlimit=122.87; northlimit=-64.31; projection=WGS 84 (EPSG:4326)&rft.coverage=westlimit=114.9; southlimit=-65.68; eastlimit=122.87; northlimit=-64.31; projection=WGS 84 (EPSG:4326)&rft_rights= https://creativecommons.org/licenses/by/4.0/&rft_rights=https://i.creativecommons.org/l/by/4.0/88x31.png&rft_rights=WWW:LINK-1.0-http--related&rft_rights=License Graphic&rft_rights=Attribution 4.0&rft_rights=WWW:LINK-1.0-http--related&rft_rights=License Text&rft_rights=Data is made available under a Creative Commons Attribution 4.0 International Licence, please see link. Data is supplied 'as is' without any warranty or guarantee except as required by law to be given to you. The data may not be free of error, comprehensive, current or appropriate for your particular purpose. You accept all risk and responsibility for its use. ATTRIBUTION STATEMENT: The dataset [Insert-dataset-name-here] downloaded on [Insert-DD-Mmm-YYYY-here] was collected on voyage [Insert-voyage-name-here] by the Marine National Facility.&rft_rights=Attribution 4.0&rft_rights= https://creativecommons.org/licenses/by/4.0/&rft_subject=oceans&rft_subject=PHOTOSYNTHETICALLY ACTIVE RADIATION&rft_subject=EARTH SCIENCE&rft_subject=OCEANS&rft_subject=OCEAN OPTICS&rft_subject=WATER PRESSURE&rft_subject=OCEAN PRESSURE&rft_subject=TURBIDITY&rft_subject=WATER TEMPERATURE&rft_subject=OCEAN TEMPERATURE&rft_subject=SALINITY&rft_subject=SALINITY/DENSITY&rft_subject=CHLOROPHYLL&rft_subject=OCEAN CHEMISTRY&rft_subject=LIGHT TRANSMISSION&rft_subject=TERRESTRIAL HYDROSPHERE&rft_subject=WATER QUALITY/WATER CHEMISTRY&rft_subject=FLUORESCENCE&rft_subject=NITRATE&rft_subject=Fluorometers&rft_subject=Nephelometers&rft_subject=Radiation Sensors&rft_subject=CTDs (Conductivity-Temperature-Depth Profilers)&rft_subject=NOX monitor&rft_subject=Global / Oceans | Southern Ocean&rft_subject=Marine Planning Regions (Australia) | Australian Antarctic&rft_subject=Marine National Facility&rft_subject=Research Voyage: IN2017_V01&rft_subject=Interactions of the Totten Glacier with the Southern Ocean through multiple glacial cycles.&rft_subject=Vessel Data: CTD&rft_subject=Ship: Investigator (RV)&rft_subject=Practical salinity of the water body&rft_subject=Temperature of the water body&rft_subject=Pressure (measured variable) in the water body exerted by overlying sea water and any medium above it&rft_subject=Pressure (measured variable) in the water body exerted by overlying sea water only&rft_subject=research vessel&rft_subject=CTD&rft.type=dataset&rft.language=English Access the data

Licence & Rights:

Other view details
Unknown

https://creativecommons.org/licenses/by/4.0/

Attribution 4.0

https://creativecommons.org/licenses/by/4.0/

https://i.creativecommons.org/l/by/4.0/88x31.png

WWW:LINK-1.0-http--related

License Graphic

Attribution 4.0

WWW:LINK-1.0-http--related

License Text

Data is made available under a Creative Commons Attribution 4.0 International Licence, please see link. Data is supplied 'as is' without any warranty or guarantee except as required by law to be given to you. The data may not be free of error, comprehensive, current or appropriate for your particular purpose. You accept all risk and responsibility for its use. ATTRIBUTION STATEMENT: The dataset [Insert-dataset-name-here] downloaded on [Insert-DD-Mmm-YYYY-here] was collected on voyage [Insert-voyage-name-here] by the Marine National Facility.

Access:

Other

Brief description

This record describes the Conductivity-Temperature-Depth (CTD) data collected from the Marine National Facility RV Investigator voyage IN2017_V01 titled: "Interactions of the Totten Glacier with the Southern Ocean through multiple glacial cycles." The voyage took place from Hobart (TAS) to Hobart between the 14th January and 5th March, 2017. Data for 33 deployments were acquired during this voyage using a Seabird SBE911 CTD, fitted with 36 twelve litre bottles on the rosette sampler. Casts 1-10, 13 – 33 were acquired using the Seabird SBE911 CTD unit 20, and casts 11 and 12 were acquired using the Seabird SBE911 CTD unit 22. CTD and sensors were changed in efforts to remediate sensor issues. CSIRO -supplied calibration factors were used to compute the pressures, and preliminary temperature and conductivity values. The data were subjected to automated QC to remove spikes and out-of-range values. Processing was completed using CapPro processing software, version 2.9. For the duration of the voyage significant spikes were observed across all recorded sensor channels. Investigation strongly suggests electrical interference was the cause of the data spikes, as mitigation measures have alleviated the issue. Care was taken in post processing to remove the spikes while maintaining true data features. The nature of the spiking was primarily extreme values persisting for a single scan, which were suitably detected and flagged by evaluating the second-difference of the data. An additional filter was also applied to the data which evaluated the median and standard deviation of the conductivity over a moving window, which was used to detect extreme changes in the sensor values characteristic of the noise induced spikes. The final conductivity calibration was based on two deployment groupings, due to sensor changes during the voyage. The final calibration for casts 1-13 from the secondary sensor had a standard deviation (S.D) of 0.0010393 PSU, within our target of ‘better than 0.002 PSU’. The final calibration for casts 14-33 from the secondary sensor had a standard deviation (S.D) of 0.0020084 PSU. The standard product of 1dbar binned averaged were produced using data from the secondary sensors. The final Oxygen calibration from the primary sensor had a S.D of 0.85991 uM. The agreement between the sensor and bottle data was good. Both Oxygen sensors calibrated closely. The Biospherical photosynthetically active radiation (PAR), Wetlabs Transmissometer, the Wetlabs ECO chlorophyll, and O&A IMU sensors were also installed on the auxiliary A/D channels of the CTD. The collected data were subsequently processed and archived within the CSIRO Oceans and Atmosphere (O&A) Information and Data Centre (IDC) in Hobart. Additional information regarding this dataset may be contained in the Voyage Summary and the CTD Data Processing Report.

Lineage

Maintenance and Update Frequency: asNeeded
Statement: Original field data. Data processing and quality control by the Marine National Facility Data Acquisition and Processing Group (DAP). Data processed and archived on 11/04/2018. Data were processed using the new CapPro system. For this voyage a moving window filter was applied to remove noise spikes from the Pressure, conductivity and oxygen sensor values.

Notes

Credit
CTD data processed by Steve Van Graas (CSIRO O&A) Data archived by Vito Dirita (CSIRO O&A).

Data time period: 2017-01-14 to 2017-03-05

This dataset is part of a larger collection

122.87,-64.31 122.87,-65.68 114.9,-65.68 114.9,-64.31 122.87,-64.31

118.885,-64.995

text: westlimit=114.9; southlimit=-65.68; eastlimit=122.87; northlimit=-64.31; projection=WGS 84 (EPSG:4326)

Other Information
(Marine National Facility)

uri : https://mnf.csiro.au/

(License/Attribution)

uri : https://creativecommons.org/licenses/by/4.0/

Identifiers
  • global : b8b1a0f1-53cf-4ae8-818d-ef3eaaeb3bba