Data

Ningaloo Reef Hail From 11 Sep 2012

Australian Ocean Data Network
Australian Institute of Marine Science (AIMS)
Viewed: [[ro.stat.viewed]] Cited: [[ro.stat.cited]] Accessed: [[ro.stat.accessed]]
ctx_ver=Z39.88-2004&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Adc&rfr_id=info%3Asid%2FANDS&rft_id=https://apps.aims.gov.au/metadata/view/49109d55-cfb6-410d-a4f6-f21218c65fc5&rft.title=Ningaloo Reef Hail From 11 Sep 2012&rft.identifier=https://apps.aims.gov.au/metadata/view/49109d55-cfb6-410d-a4f6-f21218c65fc5&rft.publisher=Australian Institute of Marine Science (AIMS)&rft.description=This data set was collected by weather sensors deployed on the AIMS Weather Station site Ningaloo Reef.Maintenance and Update Frequency: asNeededStatement: Data from AIMS weather stations are subjected to two quality control processes.The first quality control process involves applying automatic rules to the raw data to flag data points that are unlikely to be correct. These rules flag: - Values frequently associated with sensors which are faulty, in need of a service or are not working properly. - Values outside believable ranges. - Values that are out of range compared to other nearby stations. The second quality control process involves manual visualisation of all data. Data from all sensors are individually graphed and compared to sensors on the same station (e.g. water temperature 1 and water temperature 2), calibrated temperature loggers, predicted values (e.g. PAR) or compared to sensors from nearby stations (including Bureau of Meteorology stations in the case of barometric pressure, wind speed and direction). After these processes have been applied the data can be categorised in the following three levels. Level 0: Raw unprocessed data as received from the AWS. This data has had no quality control process applied to it. Level 1: Level 1 data has had all suspect data points removed but no suspect data points are corrected. Level 2: Level 2 data has had all suspect data points that were removed in Level 1 corrected where possible. Data from all three levels can be accessed from the AIMS weather station web site.&rft.creator=Australian Institute of Marine Science (AIMS) &rft.date=2024&rft.coverage=westlimit=113.921933; southlimit=-22.029036; eastlimit=113.921933; northlimit=-22.029036&rft.coverage=westlimit=113.921933; southlimit=-22.029036; eastlimit=113.921933; northlimit=-22.029036&rft_rights=Creative Commons Attribution 3.0 Australia License http://creativecommons.org/licenses/by/3.0/au/&rft_rights=Use Limitation: All AIMS data, products and services are provided as is and AIMS does not warrant their fitness for a particular purpose or non-infringement. While AIMS has made every reasonable effort to ensure high quality of the data, products and services, to the extent permitted by law the data, products and services are provided without any warranties of any kind, either expressed or implied, including without limitation any implied warranties of title, merchantability, and fitness for a particular purpose or non-infringement. AIMS make no representation or warranty that the data, products and services are accurate, complete, reliable or current. To the extent permitted by law, AIMS exclude all liability to any person arising directly or indirectly from the use of the data, products and services.&rft_rights=Attribution: Format for citation of metadata sourced from Australian Institute of Marine Science (AIMS) in a list of reference is as follows: Australian Institute of Marine Science (AIMS). (2020). Northern Australia Automated Marine Weather and Oceanographic Stations, Sites: [Ningaloo Reef], Parameters: [hail]. https://doi.org/10.25845/5c09bf93f315d, accessed[date-of-access].&rft_subject=oceans&rft_subject=Hail accumulation since 9am&rft_subject=Hail duration in the atmosphere&rft_subject=Hail intensity in the atmosphere&rft.type=dataset&rft.language=English Access the data
Cite Saved to MyRDA Save to MyRDA

Licence & Rights:

Open Licence view details
CC-BY

Creative Commons Attribution 3.0 Australia License
http://creativecommons.org/licenses/by/3.0/au/

Use Limitation: All AIMS data, products and services are provided "as is" and AIMS does not warrant their fitness for a particular purpose or non-infringement. While AIMS has made every reasonable effort to ensure high quality of the data, products and services, to the extent permitted by law the data, products and services are provided without any warranties of any kind, either expressed or implied, including without limitation any implied warranties of title, merchantability, and fitness for a particular purpose or non-infringement. AIMS make no representation or warranty that the data, products and services are accurate, complete, reliable or current. To the extent permitted by law, AIMS exclude all liability to any person arising directly or indirectly from the use of the data, products and services.

Attribution: Format for citation of metadata sourced from Australian Institute of Marine Science (AIMS) in a list of reference is as follows: "Australian Institute of Marine Science (AIMS). (2020). Northern Australia Automated Marine Weather and Oceanographic Stations, Sites: [Ningaloo Reef], Parameters: [hail]. https://doi.org/10.25845/5c09bf93f315d, accessed[date-of-access]".

Access:

Other

Full description

This data set was collected by weather sensors deployed on the AIMS Weather Station site Ningaloo Reef.

Lineage

Maintenance and Update Frequency: asNeeded
Statement: Data from AIMS weather stations are subjected to two quality control processes.The first quality control process involves applying automatic rules to the raw data to flag data points that are unlikely to be correct. These rules flag: - Values frequently associated with sensors which are faulty, in need of a service or are not working properly. - Values outside believable ranges. - Values that are out of range compared to other nearby stations. The second quality control process involves manual visualisation of all data. Data from all sensors are individually graphed and compared to sensors on the same station (e.g. water temperature 1 and water temperature 2), calibrated temperature loggers, predicted values (e.g. PAR) or compared to sensors from nearby stations (including Bureau of Meteorology stations in the case of barometric pressure, wind speed and direction). After these processes have been applied the data can be categorised in the following three levels. Level 0: Raw unprocessed data as received from the AWS. This data has had no quality control process applied to it. Level 1: Level 1 data has had all suspect data points removed but no suspect data points are corrected. Level 2: Level 2 data has had all suspect data points that were removed in Level 1 corrected where possible. Data from all three levels can be accessed from the AIMS weather station web site.

Notes

Credit
Australian Institute of Marine Science (AIMS)

Modified: 17 10 2024

This dataset is part of a larger collection

Click to explore relationships graph
Help

Related Data

Related People

113.92193,-22.02904

113.921933,-22.029036

text: westlimit=113.921933; southlimit=-22.029036; eastlimit=113.921933; northlimit=-22.029036

Subjects
Hail accumulation since 9am | Hail duration in the atmosphere | Hail intensity in the atmosphere | oceans |

User Contributed Tags    

Login to tag this record with meaningful keywords to make it easier to discover

Other Information
Ningaloo Reef Weather Station Hail Accumulation Daily Averages

uri : https://apps.aims.gov.au/ts-explorer/?qc=level0&source=10395:Weather station&fromDate=1980-01-01&thruDate=2050-01-05

Ningaloo Reef Weather Station Hail Duration Daily Averages

uri : https://apps.aims.gov.au/ts-explorer/?qc=level0&source=10396:Weather station&fromDate=1980-01-01&thruDate=2050-01-05

Ningaloo Reef Weather Station Hail Intensity Daily Averages

uri : https://apps.aims.gov.au/ts-explorer/?qc=level0&source=10397:Weather station&fromDate=1980-01-01&thruDate=2050-01-05

global : 06ea6230-55f3-11dc-8d3c-00008a07204e