Brief description
This dataset contains CTD (conductivity, temperature, depth) and nutrient (nitrate, nitrite, phosphate, silicate, manganese) data obtained from the Antarctic Division BIOMASS Experiment III (ADBEX III) cruise of the Nella Dan, during Sep - Dec 1985. This cruise is the fifth cruise out of a series of six, conducting a long term field survey on krill and other zooplankton. 50 CTD casts were taken in the Prydz Bay region, and nutrient data were collected at 25 of the stations. Casts were made to 2000 m or to near bottom over the continental shelf. The oceanographic and nutrient programs were subordinate to other programs and so the locations of the CTD stations were not always ideal for oceanographic purposes.The fields in this dataset are:
pressure
temperature
salinity
volume
geopotential
samples
deviation
conductivity
Lineage
Progress Code: completed
Statement: Oceanography and nutrient measurements were taken where possible, which was not always at ideal locations. Therefore coverage of the area is not necessarily complete. Nutrient data were only recorded at 25 out of the 50 CTD stations. This cruise is however part of a series of 6 cruises which operated in this area, providing data from varying seasons and condition.
Data collection: A Neil Brown Mark III CTD (conductivity, temperature, depth probe #1103) system attached to a rosette water sampler (General Oceanics) was used for collecting continuous vertical profiles of conductivity and temperature. Water samples were collected at different depths using the rosette water sampler with 5L Niskin bottles. Measurements were made on the downcast, and water samples collected on the upcast. The water sampling depths were determined depending on the readings made during the downcast. The CTD was lowered at a rate as close to 1 m/sec, and raised between samples at speeds between 1 and 2 m/sec. Conductivity and temperature readings were also made at each water sampling station. 50 CTD stations were taken, and nutrient samples were taken at 25 of these stations. Ship-board processing: 250 mL water sub-samples were filtered through GF/F glass fibre filters, transferred to rinsed polyethylene bottles and immediately frozen. Water samples were analysed on board the ship for salinity and oxygen.
Post-ship processing: Oceanography data - Data were initially recorded on audio cassettes, but later replayed to produce digital nine-track magnetic tapes by a PDP 11/23. Data tapes were then processed on a VAX 11/750. For each CTD downcast, an uncalibrated, despiked file was generated, using a recursive filter to compensate for sensor mismatch. The data files were used to generate 2 dbar averages for in situ temperature, salinity, sigma-t, specific volume anomaly and geopotential anomaly. The averages were centred on even, integral depths, and were only calculated when averages contained eight or more valid data points. The temperature and conductivity means were calculated for the interval, and the salinity calculated for the mid point of the pressure interval from the temperature and salinity means. Data processing software was supplied by CSIRO Division of Oceanography. Nutrient data - Analyses was completed by the Australian Government Analytical Laboratories for nitrate, nitrite, silicate, phosphate, manganese, chlorophyll a and other pigments. The complete dataset is logically consistent, as krill and zooplankton hauls and phytoplankton pigment analysis were also obtained at the same sampling sites as the oceanographic and nutrient data. The cruise track was established before the experiment in order to eliminate bias. The oceanographic sampling was done as a supplement to the krill research program and the nutrient sampling to help interpret phytoplankton distribution and abundance, so sampling location and depth were not necessarily selected according to oceanographic or nutrient related considerations.
Data collection: A Neil Brown Mark III CTD (conductivity, temperature, depth probe #1103) system attached to a rosette water sampler (General Oceanics) was used for collecting continuous vertical profiles of conductivity and temperature. Water samples were collected at different depths using the rosette water sampler with 5L Niskin bottles. Measurements were made on the downcast, and water samples collected on the upcast. The water sampling depths were determined depending on the readings made during the downcast. The CTD was lowered at a rate as close to 1 m/sec, and raised between samples at speeds between 1 and 2 m/sec. Conductivity and temperature readings were also made at each water sampling station. 50 CTD stations were taken, and nutrient samples were taken at 25 of these stations. Ship-board processing: 250 mL water sub-samples were filtered through GF/F glass fibre filters, transferred to rinsed polyethylene bottles and immediately frozen. Water samples were analysed on board the ship for salinity and oxygen.
Post-ship processing: Oceanography data - Data were initially recorded on audio cassettes, but later replayed to produce digital nine-track magnetic tapes by a PDP 11/23. Data tapes were then processed on a VAX 11/750. For each CTD downcast, an uncalibrated, despiked file was generated, using a recursive filter to compensate for sensor mismatch. The data files were used to generate 2 dbar averages for in situ temperature, salinity, sigma-t, specific volume anomaly and geopotential anomaly. The averages were centred on even, integral depths, and were only calculated when averages contained eight or more valid data points. The temperature and conductivity means were calculated for the interval, and the salinity calculated for the mid point of the pressure interval from the temperature and salinity means. Data processing software was supplied by CSIRO Division of Oceanography. Nutrient data - Analyses was completed by the Australian Government Analytical Laboratories for nitrate, nitrite, silicate, phosphate, manganese, chlorophyll a and other pigments. The complete dataset is logically consistent, as krill and zooplankton hauls and phytoplankton pigment analysis were also obtained at the same sampling sites as the oceanographic and nutrient data. The cruise track was established before the experiment in order to eliminate bias. The oceanographic sampling was done as a supplement to the krill research program and the nutrient sampling to help interpret phytoplankton distribution and abundance, so sampling location and depth were not necessarily selected according to oceanographic or nutrient related considerations.
Data time period: 1985-10-06 to 1985-12-13
text: westlimit=49; southlimit=-66.0; eastlimit=70; northlimit=-55.0
Subjects
AMD |
AMD/AU |
CEOS |
CONDUCTIVITY |
CTD > Conductivity, Temperature, Depth |
DEVIATION |
EARTH SCIENCE > ATMOSPHERE > ATMOSPHERIC RADIATION > SOLAR RADIATION |
EARTH SCIENCE > ATMOSPHERE > ATMOSPHERIC TEMPERATURE > SURFACE TEMPERATURE > AIR TEMPERATURE |
EARTH SCIENCE > ATMOSPHERE > ATMOSPHERIC WATER VAPOR > WATER VAPOR INDICATORS > HUMIDITY |
EARTH SCIENCE > ATMOSPHERE > ATMOSPHERIC WINDS > SURFACE WINDS |
EARTH SCIENCE > ATMOSPHERE > PRECIPITATION > LIQUID PRECIPITATION > RAIN |
EARTH SCIENCE > OCEANS > BATHYMETRY/SEAFLOOR TOPOGRAPHY > WATER DEPTH |
EARTH SCIENCE > OCEANS > OCEAN TEMPERATURE > WATER TEMPERATURE |
GEOGRAPHIC REGION > POLAR |
GEOPOTENTIAL |
MARINE |
OCEAN > SOUTHERN OCEAN |
OCEANOGRAPHY |
PRESSURE |
SALINITY |
SAMPLES |
SHIPS |
TEMPERATURE |
VOLUME |
climatologyMeteorologyAtmosphere |
elevation |
oceans |
User Contributed Tags
Login to tag this record with meaningful keywords to make it easier to discover
Other Information
Marine Science Data Search (GET DATA)
uri :
http://data.aad.gov.au/aadc/marine_science/underway_extraction/index.cfm
Identifiers
- global : ADBEX_III_ocean
