Data

Interactive online visualization for cold spray additive manufacture of titanium walls and square corners

Commonwealth Scientific and Industrial Research Organisation
Vargas Uscategui, Alejandro ; King, Peter ; Yang, Sam ; Chu, Clement ; Li, Jianli
Viewed: [[ro.stat.viewed]] Cited: [[ro.stat.cited]] Accessed: [[ro.stat.accessed]]
ctx_ver=Z39.88-2004&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Adc&rfr_id=info%3Asid%2FANDS&rft_id=info:doi10.25919/5fab39600c015&rft.title=Interactive online visualization for cold spray additive manufacture of titanium walls and square corners&rft.identifier=https://doi.org/10.25919/5fab39600c015&rft.publisher=Commonwealth Scientific and Industrial Research Organisation&rft.description=Cold spray is a solid-state deposition process that is well suited to oxygen-sensitive materials such as titanium. Cold spray has been widely considered as an additive manufacturing technique, but systematic study of how to control the process to produce 3D objects has not been published. The purpose of this paper is to determine the influence of tool path planning strategy and robot kinematics on geometry and porosity distribution of a 3D object. The capacity of the cold spray technique to produce straight, vertical walls and features that require 90 turns is demonstrated. Square titanium frames were manufactured using a continuous tool path planning strategy in which the contour spray angle, traverse speed and corner smoothing radius (zone data) were varied selectively. The geometry of the samples was analysed by 3D laser scanning, and the porosity distribution by metallographic analysis and X-ray computed tomography. The straightness of the titanium walls depends on the contour spray angle while the shape of the square corner is affected by the traverse speed and corner radius. Best geometry control was achieved using a low traverse speed and small corner radius. Some level of geometry control can be achieved at higher traverse speed by increasing corner radius at a constant powder feed rate. Porosity is distributed layer by layer creating a fishbone structure in cross-section with higher porosity between the layers and near the lateral edges of the walls and corners. The thickness of the porous section at the edges must be considered for post-deposition machining if required.&rft.creator=Vargas Uscategui, Alejandro &rft.creator=King, Peter &rft.creator=Yang, Sam &rft.creator=Chu, Clement &rft.creator=Li, Jianli &rft.date=2021&rft.edition=v6&rft_rights=Creative Commons Attribution-Noncommercial-No Derivatives 4.0 International Licence https://creativecommons.org/licenses/by-nc-nd/4.0/&rft_rights=Data is accessible online and may be reused in accordance with licence conditions&rft_rights=All Rights (including copyright) CSIRO 2020.&rft_subject=Web3D&rft_subject=data-constrained modelling&rft_subject=DCM&rft_subject=Cold spray, titanium, additive manufacturing, 3D printing, geometry, porosity&rft_subject=Manufacturing processes and technologies (excl. textiles)&rft_subject=Manufacturing engineering&rft_subject=ENGINEERING&rft.type=dataset&rft.language=English Access the data
Cite Saved to MyRDA Save to MyRDA

Licence & Rights:

Non-Derivative Licence view details
CC-BY-NC-ND

Creative Commons Attribution-Noncommercial-No Derivatives 4.0 International Licence
https://creativecommons.org/licenses/by-nc-nd/4.0/

Data is accessible online and may be reused in accordance with licence conditions

All Rights (including copyright) CSIRO 2020.

Access:

Open view details

Accessible for free

Contact Information



Brief description

Cold spray is a solid-state deposition process that is well suited to oxygen-sensitive materials such as titanium. Cold spray has been widely considered as an additive manufacturing technique, but systematic study of how to control the process to produce 3D objects has not been published. The purpose of this paper is to determine the influence of tool path planning strategy and robot kinematics on geometry and porosity distribution of a 3D object. The capacity of the cold spray technique to produce straight, vertical walls and features that require 90 turns is demonstrated. Square titanium frames were manufactured using a continuous tool path planning strategy in which the contour spray angle, traverse speed and corner smoothing radius (zone data) were varied selectively. The geometry of the samples was analysed by 3D laser scanning, and the porosity distribution by metallographic analysis and X-ray computed tomography. The straightness of the titanium walls depends on the contour spray angle while the shape of the square corner is affected by the traverse speed and corner radius. Best geometry control was achieved using a low traverse speed and small corner radius. Some level of geometry control can be achieved at higher traverse speed by increasing corner radius at a constant powder feed rate. Porosity is distributed layer by layer creating a fishbone structure in cross-section with higher porosity between the layers and near the lateral edges of the walls and corners. The thickness of the porous section at the edges must be considered for post-deposition machining if required.

Available: 2021-09-28

Data time period: .. to 2020-11-09

This dataset is part of a larger collection

Click to explore relationships graph
Help

Related Websites

Subjects
Cold spray, titanium, additive manufacturing, 3D printing, geometry, porosity | DCM | Engineering | Manufacturing Engineering | Manufacturing Processes and Technologies (Excl. Textiles) | Web3D | data-constrained modelling |

User Contributed Tags    

Login to tag this record with meaningful keywords to make it easier to discover

Identifiers
Similar data you may be interested in: