Data

Heron Island Sensor Float 5

Australian Ocean Data Network
Australian Institute of Marine Science (AIMS) ; Integrated Marine Observing System (IMOS)
Viewed: [[ro.stat.viewed]] Cited: [[ro.stat.cited]] Accessed: [[ro.stat.accessed]]
ctx_ver=Z39.88-2004&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Adc&rfr_id=info%3Asid%2FANDS&rft_id=http://catalogue-aodn.prod.aodn.org.au/geonetwork/srv/eng/search?uuid=d870da98-aaf6-4424-8ac5-667c59905289&rft.title=Heron Island Sensor Float 5&rft.identifier=http://catalogue-aodn.prod.aodn.org.au/geonetwork/srv/eng/search?uuid=d870da98-aaf6-4424-8ac5-667c59905289&rft.publisher=Australian Institute of Marine Science (AIMS)&rft.description=A round 1.4m yellow buoy has been deployed in the Heron Island lagoon as part of the sensor network infrastructure at Heron Island in the southern Great Barrier Reef off Gladstone, Australia. The buoy is configured as a sensor-float with a Campbell Scientific logger, a spread-spectrum radio for communicating with the on-reef wireless network, a GPS and initially a surface mounted (30cm under the water surface) thermistor.The float is moored in the lagoon of Heron Island in around 3m of water and will be used to monitor the flow of water through the lagoon. It will be fitted with surface salinity and bottom depth and temperature in late 2008. The unit will be serviced every six months and will be used in the future for attaching new sets of sensors. The buoy is re-locatable and the GPS data should be used to find the current location. The buoy is one of five re-locatable platforms in the lagoon at Heron Island onto which sensor will be located. The buoys initially have a Campbell Scientific loggers powered off two 5W solar panels, a Garmin GPS unit and one thermistor located at the base of the buoy around 30cm below the water line. The buoys use a Campbell Scientific spread-spectrum radio to talk back to the base station located on Heron Island. Power SupplyBattery Backed (1 x 33Ahr AGM with Solar Regulator), 2 x 5W Solar Panel Supply.Logger Settings - Pakbus Address - 175Logger Setup as node (isRouter = False)CSDC7 comms board rate set at 34KSDC7 Neighbours range: 1-1, 150-150,130-130SCD7 beacon = 21600Over-Reef RF Network - RF411 attached to the CSIO port of the loggerRadio Settings - Active Interface - Datalogger CSDCSDC Address 7Protocol: Pakbus awareRadio Net Address - 0Hop Sequence - 0Power mode - Retry level - LowMaintenance and Update Frequency: continualStatement: Statement: All sensors are factory calibrated and serviced every six months.Statement: Data are checked against a set of rules and then flagged using the IODE set of flags.&rft.creator=Australian Institute of Marine Science (AIMS) &rft.creator=Integrated Marine Observing System (IMOS) &rft.date=2024&rft.coverage=westlimit=151.98235; southlimit=-23.44475; eastlimit=151.98235; northlimit=-23.44475&rft.coverage=westlimit=151.98235; southlimit=-23.44475; eastlimit=151.98235; northlimit=-23.44475&rft_rights= http://creativecommons.org/licenses/by/3.0/au/&rft_rights=http://i.creativecommons.org/l/by/3.0/au/88x31.png&rft_rights=WWW:LINK-1.0-http--related&rft_rights=License Graphic&rft_rights=Creative Commons Attribution 3.0 Australia License&rft_rights=http://creativecommons.org/international/au/&rft_rights=WWW:LINK-1.0-http--related&rft_rights=WWW:LINK-1.0-http--related&rft_rights=License Text&rft_rights=Use Limitation: All AIMS data, products and services are provided as is and AIMS does not warrant their fitness for a particular purpose or non-infringement. While AIMS has made every reasonable effort to ensure high quality of the data, products and services, to the extent permitted by law the data, products and services are provided without any warranties of any kind, either expressed or implied, including without limitation any implied warranties of title, merchantability, and fitness for a particular purpose or non-infringement. AIMS make no representation or warranty that the data, products and services are accurate, complete, reliable or current. To the extent permitted by law, AIMS exclude all liability to any person arising directly or indirectly from the use of the data, products and services.&rft_rights=Attribution: Format for citation of metadata sourced from Australian Institute of Marine Science (AIMS) in a list of reference is as follows: Australian Institute of Marine Science (AIMS). (2017). Northern Australia Automated Marine Weather and Oceanographic Stations, Sites: [Heron Island]. https://doi.org/10.25845/5c09bf93f315d, accessed[date-of-access].&rft_rights=Creative Commons Attribution 3.0 Australia License http://creativecommons.org/licenses/by/3.0/au&rft_subject=oceans&rft.type=dataset&rft.language=English Access the data

Licence & Rights:

Open Licence view details
CC-BY

http://creativecommons.org/licenses/by/3.0/au/

Creative Commons Attribution 3.0 Australia License
http://creativecommons.org/licenses/by/3.0/au

http://i.creativecommons.org/l/by/3.0/au/88x31.png

WWW:LINK-1.0-http--related

License Graphic

Creative Commons Attribution 3.0 Australia License

http://creativecommons.org/international/au/

WWW:LINK-1.0-http--related

WWW:LINK-1.0-http--related

License Text

Use Limitation: All AIMS data, products and services are provided "as is" and AIMS does not warrant their fitness for a particular purpose or non-infringement. While AIMS has made every reasonable effort to ensure high quality of the data, products and services, to the extent permitted by law the data, products and services are provided without any warranties of any kind, either expressed or implied, including without limitation any implied warranties of title, merchantability, and fitness for a particular purpose or non-infringement. AIMS make no representation or warranty that the data, products and services are accurate, complete, reliable or current. To the extent permitted by law, AIMS exclude all liability to any person arising directly or indirectly from the use of the data, products and services.

Attribution: Format for citation of metadata sourced from Australian Institute of Marine Science (AIMS) in a list of reference is as follows: "Australian Institute of Marine Science (AIMS). (2017). Northern Australia Automated Marine Weather and Oceanographic Stations, Sites: [Heron Island]. https://doi.org/10.25845/5c09bf93f315d, accessed[date-of-access]".

Access:

Open

Contact Information

reception@aims.gov.au

Brief description

A round 1.4m yellow buoy has been deployed in the Heron Island lagoon as part of the sensor network infrastructure at Heron Island in the southern Great Barrier Reef off Gladstone, Australia. The buoy is configured as a sensor-float with a Campbell Scientific logger, a spread-spectrum radio for communicating with the on-reef wireless network, a GPS and initially a surface mounted (30cm under the water surface) thermistor.The float is moored in the lagoon of Heron Island in around 3m of water and will be used to monitor the flow of water through the lagoon. It will be fitted with surface salinity and bottom depth and temperature in late 2008. The unit will be serviced every six months and will be used in the future for attaching new sets of sensors. The buoy is re-locatable and the GPS data should be used to find the current location.
The buoy is one of five re-locatable platforms in the lagoon at Heron Island onto which sensor will be located. The buoys initially have a Campbell Scientific loggers powered off two 5W solar panels, a Garmin GPS unit and one thermistor located at the base of the buoy around 30cm below the water line. The buoys use a Campbell Scientific spread-spectrum radio to talk back to the base station located on Heron Island.
Power SupplyBattery Backed (1 x 33Ahr AGM with Solar Regulator), 2 x 5W Solar Panel Supply.Logger Settings - Pakbus Address - 175Logger Setup as node (isRouter = False)CSDC7 comms board rate set at 34KSDC7 Neighbours range: 1-1, 150-150,130-130SCD7 beacon = 21600Over-Reef RF Network - RF411 attached to the CSIO port of the loggerRadio Settings - Active Interface - Datalogger CSDCSDC Address 7Protocol: Pakbus awareRadio Net Address - 0Hop Sequence - 0Power mode - Retry level - Low

Lineage

Maintenance and Update Frequency: continual
Statement: Statement: All sensors are factory calibrated and serviced every six months.Statement: Data are checked against a set of rules and then flagged using the IODE set of flags.

Notes

Credit
Bainbridge, Scott, Mr (Point Of Contact)

Modified: 03 2024

This dataset is part of a larger collection

Click to explore relationships graph

151.98235,-23.44475

151.98235,-23.44475

text: westlimit=151.98235; southlimit=-23.44475; eastlimit=151.98235; northlimit=-23.44475

Subjects
oceans |

User Contributed Tags    

Login to tag this record with meaningful keywords to make it easier to discover

Other Information
Identifiers
  • global : d870da98-aaf6-4424-8ac5-667c59905289