Data

Bunger Hills SPOT5 DEM (Digital Elevation Model)

Australian Antarctic Division
Brolsma, H. ; BROLSMA, HENK
Viewed: [[ro.stat.viewed]] Cited: [[ro.stat.cited]] Accessed: [[ro.stat.accessed]]
ctx_ver=Z39.88-2004&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Adc&rfr_id=info%3Asid%2FANDS&rft_id=http://data.aad.gov.au/metadata/bunger_hills_spot5_dem_gis&rft.title=Bunger Hills SPOT5 DEM (Digital Elevation Model)&rft.identifier=http://data.aad.gov.au/metadata/bunger_hills_spot5_dem_gis&rft.publisher=Australian Antarctic Data Centre&rft.description=A digital elevation Model (DEM) of the Bunger Hills with a five metre grid interval,and held in UTM Zone 47, WGS 84 horizontal coordinates and EGM 96 elevation datum. Heights are referenced to Ellipsoid EGM96. The DEM was produced by SPOT image and conforms to standard SPOT image specifications.See PDF document SPOT DEM Product Description Version 1.2 January 1, 2005. SPOT DEM accuracies.The DEM accuracy specifications below are valid for a full square degree and solely apply to DEMs generated from HRS imagery and not to DEMs derived from external sources. The SPOT DEM absolute horizontal and vertical accuracies depend on the dimensions of the area of interest or on the availability of Reference3D on this area:Absolute planimetric accuracy:Circular error with respect to WGS84 (confidence level 90%) 15m to 30mAbsolute elevation accuracy:Linear error with respect to EGM96 (confidence level 90%)flat or rolling terrain (slope - 20%) 10m to 20mSPOT DEM products may have variable planimetric and elevation performances: Small areas: One to a few HRS stereopairs HRS intrinsic accuracies 30m @90% planimetric accuracies 20m@90% elevation accuracyThe absolute planimetric accuracy of 15m can be achieved if excellent-quality ground control points (better than 10m) are used. NOTE: No ground control points were used in the DEM.DEM layer correctionsSPOT DEM production systematically includes:Automatic filtering to eliminate correlation artifacts Flattening of non-running water bodies (rivers etc excluded) exceeding 0.5km2Progress Code: completedStatement: The DEM produced from SPOT 5 HRS data by SPOT image conforms to SPOT DEM standard product descriptions. See SPOT Image DEM Product Description Version 1.2 January 1, 2005. Usually mapped to a Universal transverse Mercator projection, zone 47, units metres, spheroid EGM96, Datum WGS84.&rft.creator=Brolsma, H. &rft.creator=BROLSMA, HENK &rft.date=2007&rft.coverage=westlimit=100; southlimit=-66.5167; eastlimit=101.85; northlimit=-65.8167&rft.coverage=westlimit=100; southlimit=-66.5167; eastlimit=101.85; northlimit=-65.8167&rft.coverage=uplimit=410; downlimit=5&rft.coverage=uplimit=410; downlimit=5&rft_rights=The DEM is stored in ERMapper format. It is available for download in ER Mapper, ESRI Grid, geotiff or GRD formats. PDF copies of the standard SPOT Image product description, plus the specific product description relating to this image are also available for download from the provided URLs.&rft_rights=Attribution 4.0 International (CC BY 4.0) https://creativecommons.org/licenses/by/4.0/legalcode&rft_rights=This data set conforms to the CCBY Attribution License (http://creativecommons.org/licenses/by/4.0/). Please follow instructions listed in the citation reference provided at http://data.aad.gov.au/aadc/metadata/citation.cfm?entry_id=bunger_hills_spot5_dem_gis when using these data.&rft_rights=This metadata record is publicly available.&rft_subject=elevation&rft_subject=imageryBaseMapsEarthCover&rft_subject=EARTH SCIENCE > LAND SURFACE > TOPOGRAPHY > TERRAIN ELEVATION > CONTOUR MAPS&rft_subject=EARTH SCIENCE > LAND SURFACE > TOPOGRAPHY > TERRAIN ELEVATION > TOPOGRAPHICAL RELIEF MAPS&rft_subject=EARTH SCIENCE > LAND SURFACE > TOPOGRAPHY > TERRAIN ELEVATION&rft_subject=SPOT 5&rft_subject=DEM&rft_subject=CONTOURS&rft_subject=DIGITAL ELEVATION MODEL&rft_subject=GIS&rft_subject=Bunger Hills&rft_subject=HRS > High Resolution Stereoscopic Instrument&rft_subject=SPOT-5 > Systeme Probatoire Pour l'Observation de la Terre-5&rft_subject=AMD/AU&rft_subject=CEOS&rft_subject=AMD&rft_subject=CONTINENT > ANTARCTICA&rft_subject=GEOGRAPHIC REGION > POLAR&rft.type=dataset&rft.language=English Access the data

Licence & Rights:

Open Licence view details
CC-BY

Attribution 4.0 International (CC BY 4.0)
https://creativecommons.org/licenses/by/4.0/legalcode

The DEM is stored in ERMapper format. It is available for download in ER Mapper, ESRI Grid, geotiff or GRD formats. PDF copies of the standard SPOT Image product description, plus the specific product description relating to this image are also available for download from the provided URLs.

This data set conforms to the CCBY Attribution License (http://creativecommons.org/licenses/by/4.0/). Please follow instructions listed in the citation reference provided at http://data.aad.gov.au/aadc/metadata/citation.cfm?entry_id=bunger_hills_spot5_dem_gis when using these data.

This metadata record is publicly available.

Access:

Other

Full description

A digital elevation Model (DEM) of the Bunger Hills with a five metre grid interval,and held in UTM Zone 47, WGS 84 horizontal coordinates and EGM 96 elevation datum. Heights are referenced to Ellipsoid EGM96. The DEM was produced by SPOT image and conforms to standard SPOT image specifications.

See PDF document SPOT DEM Product Description Version 1.2 January 1, 2005. SPOT DEM accuracies.

The DEM accuracy specifications below are valid for a full square degree and solely apply to DEMs generated from HRS imagery and not to DEMs derived from external sources. The SPOT DEM absolute horizontal and vertical accuracies depend on the dimensions of the area of interest or on the availability of Reference3D on this area:

Absolute planimetric accuracy:
Circular error with respect to WGS84 (confidence level 90%) 15m to 30m

Absolute elevation accuracy:
Linear error with respect to EGM96 (confidence level 90%)
flat or rolling terrain (slope - 20%) 10m to 20m

SPOT DEM products may have variable planimetric and elevation performances: Small areas: One to a few HRS stereopairs HRS intrinsic accuracies 30m @90% planimetric accuracies 20m@90% elevation accuracy

The absolute planimetric accuracy of 15m can be achieved if excellent-quality ground control points (better than 10m) are used.
NOTE: No ground control points were used in the DEM.

DEM layer corrections
SPOT DEM production systematically includes:
Automatic filtering to eliminate correlation artifacts Flattening of non-running water bodies (rivers etc excluded) exceeding 0.5km2

Lineage

Progress Code: completed
Statement: The DEM produced from SPOT 5 HRS data by SPOT image conforms to SPOT DEM standard product descriptions. See SPOT Image DEM Product Description Version 1.2 January 1, 2005. Usually mapped to a Universal transverse Mercator projection, zone 47, units metres, spheroid EGM96, Datum WGS84.

Data time period: 2007-01-17 to 2007-01-17

This dataset is part of a larger collection

Click to explore relationships graph

100,-66.5167 101.85,-66.5167 101.85,-65.8167 100,-65.8167 100,-66.5167

100.925,-66.1667

text: westlimit=100; southlimit=-66.5167; eastlimit=101.85; northlimit=-65.8167

text: uplimit=410; downlimit=5

Other Information
Related Metadata - Bunger Hills SPOT 5 DEM (EXTENDED METADATA)

url : https://data.aad.gov.au/metadata/records/bunger_hills_contours

Download page for associated PDF documentation (GET DATA)

url : http://data.aad.gov.au/eds/1528/download

Download Bunger Hills SPOT5 DEM (Digital Elevation Model) in ER Mapper format (GET DATA)

url : https://data.aad.gov.au/eds/2304/download

Download Bunger Hills SPOT5 DEM (Digital Elevation Model) in ESRI grid format (GET DATA)

url : https://data.aad.gov.au/eds/2305/download

Download Bunger Hills SPOT5 DEM (Digital Elevation Model) as a geotiff (GET DATA)

url : http://data.aad.gov.au/eds/2306/download

Download Bunger Hills SPOT5 DEM (Digital Elevation Model) in GRD format (GET DATA)

url : http://data.aad.gov.au/eds/2307/download

SPOT IMAGE home page (PROJECT HOME PAGE)

url : http://www.intelligence-airbusds.com/en/143-spot-satellite-imagery

Citation reference for this metadata record and dataset (VIEW RELATED INFORMATION)

url : http://data.aad.gov.au/aadc/metadata/citation.cfm?entry_id=bunger_hills_spot5_dem_gis

Identifiers
  • global : bunger_hills_spot5_dem_gis
ACN 633 798 857