Data

A Cage Aquaculture Decision Support Tool (CADS_TOOL)

Australian Ocean Data Network
Australian Institute of Marine Science (AIMS) ; Australian Institute of Marine Science
Viewed: [[ro.stat.viewed]] Cited: [[ro.stat.cited]] Accessed: [[ro.stat.accessed]]
ctx_ver=Z39.88-2004&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Adc&rfr_id=info%3Asid%2FANDS&rft_id=https://apps.aims.gov.au/metadata/view/bd1a43f0-fafc-11dc-b047-00008a07204e&rft.title=A Cage Aquaculture Decision Support Tool (CADS_TOOL)&rft.identifier=https://apps.aims.gov.au/metadata/view/bd1a43f0-fafc-11dc-b047-00008a07204e&rft.publisher=Australian Institute of Marine Science (AIMS)&rft.description=This tool consists of four modules: Site Classification, Site Selection, Holding Capacity and Economic Appraisal. The first two modules, Site Classification and Site Selection modules are linked and result in an assessment of the suitability of a particular site for cage aquaculture. The four modules are: 1. Site Classification - allows a site to be classified into three suitability categories (Poor, Medium or Good) based on water quality, substrate quality, hydrometeorology and socioeconomics parameters. 2. Site Selection - incorporates scores from the Site Classification module. User defined weights (index of relative importance) are assigned to the criteria in the Site Classification module and the overall suitability of the site is calculated. 3. Holding Capacity - allows for the calculation of holding or carrying capacity based on four different models. For marine cages, the methods available are: Simplified MOM based on Stigebrandt et al (2004), Tookwinas et al (2004) and Hanafi et al (2006). Palatsu et al (2003) is used for freshwater cages in lakes/dams. 4. Economic Appraisal - allows for the calculation of a break-even price and return on investment. The Cage Aquaculture Decision Support Tool was developed to allow marine and freshwater cage aquaculture managers to: 1. classify a site 2. select the best site from several site alternatives 3. calculate the sustainable holding density of a chosen site and 4. perform a basic economic appraisal of a farm at that site. Calculation methods for marine cages: Hanafi, A., Andriyanto, W., Syahidah, D., Sukresno, B. 2006. Characteristics and carrying capacity of Kaping Bay, Buleleng Regency, Bali for marine aquaculture development (in Indonesian). Kajian Keragaan dan Pemanfaatan Perikanan Budidaya (Editors: Ahmad, T., Syah, R., Mustafa, A.): 83-95. Stigebrandt A, Aure J, Ervik A, Hansen PK (2004) Regulating the local environmental impact of intensive marine fish farming III. A model for estimation of the holding capacity in the Modelling-Ongrowing fish farm-Monitoring system. Aquaculture, 234: 239-261. Tookwinas S, Songsangjinda P, Kajonwattanakul S, Singharachai C (2004) Carrying capacity estimation of marine finfish cage culture at Pathew Bay, Chumphon Province, Southern Thailand. Southeast Asian Fisheries Development Centre. TD/RES/91 LBCFM-PD No. 34. Calculation methods for freshwater cages in lakes/dams: Pulatsü S (2003) The application of a phosphorus budget model estimating the carrying capacity of Kesikköprü dam. Turkish Journal of Veterinary Animal Sciences, 27: 1127-1130 Due to its age, AIMS no longer supports CADS TOOL. The software will no longer run on typical PC’s, however, the algorithms are specified in the paper to facilitate coding in Python, R, Matlab etc. Halmar Halide, A. Stigebrandt, M. Rehbein, and A.D. McKinnon. Developing a decision support system for sustainable cage aquaculture. Environmental Modelling & Software, 24(6):694-702, 2009. Dr Halmar Halide, (Universitas Hasanuddin , Makassar) can be contact via the Department of Physics at fmipauh@sci.unhas.ac.idMaintenance and Update Frequency: asNeededStatement: Statement: Developed using the Java platform. Requires Java Version 6, Update 5, as of March 2008.&rft.creator=Australian Institute of Marine Science (AIMS) &rft.creator=Australian Institute of Marine Science &rft.date=2024&rft.coverage=westlimit=100.0; southlimit=-12.0; eastlimit=141.0; northlimit=2.0&rft.coverage=westlimit=100.0; southlimit=-12.0; eastlimit=141.0; northlimit=2.0&rft.coverage=westlimit=125.0; southlimit=-18.0; eastlimit=142.0; northlimit=-8.0&rft.coverage=westlimit=125.0; southlimit=-18.0; eastlimit=142.0; northlimit=-8.0&rft_rights= http://creativecommons.org/licenses/by-nc/3.0/au/&rft_rights=http://i.creativecommons.org/l/by-nc/3.0/au/88x31.png&rft_rights=WWW:LINK-1.0-http--related&rft_rights=License Graphic&rft_rights=Creative Commons Attribution-NonCommercial 3.0 Australia License&rft_rights=http://creativecommons.org/international/au/&rft_rights=WWW:LINK-1.0-http--related&rft_rights=WWW:LINK-1.0-http--related&rft_rights=License Text&rft_rights=Use Limitation: All AIMS data, products and services are provided as is and AIMS does not warrant their fitness for a particular purpose or non-infringement. While AIMS has made every reasonable effort to ensure high quality of the data, products and services, to the extent permitted by law the data, products and services are provided without any warranties of any kind, either expressed or implied, including without limitation any implied warranties of title, merchantability, and fitness for a particular purpose or non-infringement. AIMS make no representation or warranty that the data, products and services are accurate, complete, reliable or current. To the extent permitted by law, AIMS exclude all liability to any person arising directly or indirectly from the use of the data, products and services.&rft_rights=Attribution: Format for citation of metadata sourced from Australian Institute of Marine Science (AIMS) in a list of reference is as follows: Australian Institute of Marine Science. (2009). A Cage Aquaculture Decision Support Tool (CADS_TOOL). https://apps.aims.gov.au/metadata/view/bd1a43f0-fafc-11dc-b047-00008a07204e, accessed[date-of-access].&rft_rights=Resource Usage:Use of the AIMS data is for not-for-profit applications only. All other users shall seek permission for use by contacting AIMS. Acknowledgements as prescribed must be clearly set out in the user's formal communications or publications.&rft_rights=Creative Commons Attribution-NonCommercial 3.0 Australia License http://creativecommons.org/licenses/by-nc/3.0/au&rft_subject=oceans&rft.type=dataset&rft.language=English Access the data

Licence & Rights:

Non-Commercial Licence view details
CC-BY-NC

http://creativecommons.org/licenses/by-nc/3.0/au/

Creative Commons Attribution-NonCommercial 3.0 Australia License
http://creativecommons.org/licenses/by-nc/3.0/au

http://i.creativecommons.org/l/by-nc/3.0/au/88x31.png

WWW:LINK-1.0-http--related

License Graphic

Creative Commons Attribution-NonCommercial 3.0 Australia License

http://creativecommons.org/international/au/

WWW:LINK-1.0-http--related

WWW:LINK-1.0-http--related

License Text

Use Limitation: All AIMS data, products and services are provided "as is" and AIMS does not warrant their fitness for a particular purpose or non-infringement. While AIMS has made every reasonable effort to ensure high quality of the data, products and services, to the extent permitted by law the data, products and services are provided without any warranties of any kind, either expressed or implied, including without limitation any implied warranties of title, merchantability, and fitness for a particular purpose or non-infringement. AIMS make no representation or warranty that the data, products and services are accurate, complete, reliable or current. To the extent permitted by law, AIMS exclude all liability to any person arising directly or indirectly from the use of the data, products and services.

Attribution: Format for citation of metadata sourced from Australian Institute of Marine Science (AIMS) in a list of reference is as follows: "Australian Institute of Marine Science. (2009). A Cage Aquaculture Decision Support Tool (CADS_TOOL). https://apps.aims.gov.au/metadata/view/bd1a43f0-fafc-11dc-b047-00008a07204e, accessed[date-of-access]".

Resource Usage:Use of the AIMS data is for not-for-profit applications only. All other users shall seek permission for use by contacting AIMS. Acknowledgements as prescribed must be clearly set out in the user's formal communications or publications.

Access:

Open

Brief description

This tool consists of four modules: Site Classification, Site Selection, Holding Capacity and Economic Appraisal. The first two modules, Site Classification and Site Selection modules are linked and result in an assessment of the suitability of a particular site for cage aquaculture. The four modules are: 1. Site Classification - allows a site to be classified into three suitability categories (Poor, Medium or Good) based on water quality, substrate quality, hydrometeorology and socioeconomics parameters. 2. Site Selection - incorporates scores from the Site Classification module. User defined weights (index of relative importance) are assigned to the criteria in the Site Classification module and the overall suitability of the site is calculated. 3. Holding Capacity - allows for the calculation of holding or carrying capacity based on four different models. For marine cages, the methods available are: Simplified MOM based on Stigebrandt et al (2004), Tookwinas et al (2004) and Hanafi et al (2006). Palatsu et al (2003) is used for freshwater cages in lakes/dams. 4. Economic Appraisal - allows for the calculation of a break-even price and return on investment. The Cage Aquaculture Decision Support Tool was developed to allow marine and freshwater cage aquaculture managers to: 1. classify a site 2. select the best site from several site alternatives 3. calculate the sustainable holding density of a chosen site and 4. perform a basic economic appraisal of a farm at that site. Calculation methods for marine cages: Hanafi, A., Andriyanto, W., Syahidah, D., Sukresno, B. 2006. Characteristics and carrying capacity of Kaping Bay, Buleleng Regency, Bali for marine aquaculture development (in Indonesian). Kajian Keragaan dan Pemanfaatan Perikanan Budidaya (Editors: Ahmad, T., Syah, R., Mustafa, A.): 83-95. Stigebrandt A, Aure J, Ervik A, Hansen PK (2004) Regulating the local environmental impact of intensive marine fish farming III. A model for estimation of the holding capacity in the Modelling-Ongrowing fish farm-Monitoring system. Aquaculture, 234: 239-261. Tookwinas S, Songsangjinda P, Kajonwattanakul S, Singharachai C (2004) Carrying capacity estimation of marine finfish cage culture at Pathew Bay, Chumphon Province, Southern Thailand. Southeast Asian Fisheries Development Centre. TD/RES/91 LBCFM-PD No. 34. Calculation methods for freshwater cages in lakes/dams: Pulatsü S (2003) The application of a phosphorus budget model estimating the carrying capacity of Kesikköprü dam. Turkish Journal of Veterinary Animal Sciences, 27: 1127-1130 Due to its age, AIMS no longer supports CADS TOOL. The software will no longer run on typical PC’s, however, the algorithms are specified in the paper to facilitate coding in Python, R, Matlab etc. Halmar Halide, A. Stigebrandt, M. Rehbein, and A.D. McKinnon. Developing a decision support system for sustainable cage aquaculture. Environmental Modelling & Software, 24(6):694-702, 2009. Dr Halmar Halide, (Universitas Hasanuddin , Makassar) can be contact via the Department of Physics at fmipauh@sci.unhas.ac.id

Lineage

Maintenance and Update Frequency: asNeeded
Statement: Statement: Developed using the Java platform. Requires Java Version 6, Update 5, as of March 2008.

Notes

Credit
Skuza, Michele (Custodian)
Credit
Halide, Halmar (Principal Investigator)

Modified: 10 08 2024

This dataset is part of a larger collection

Click to explore relationships graph

141,2 141,-12 100,-12 100,2 141,2

120.5,-5

142,-8 142,-18 125,-18 125,-8 142,-8

133.5,-13

text: westlimit=100.0; southlimit=-12.0; eastlimit=141.0; northlimit=2.0

text: westlimit=125.0; southlimit=-18.0; eastlimit=142.0; northlimit=-8.0

Subjects
oceans |

User Contributed Tags    

Login to tag this record with meaningful keywords to make it easier to discover

Other Information
CADS_TOOL (Cage Aquaculture Decision Support Tool): Halide H, McKinnon AD, Rehbein MA, Trott LA and Brinkman RM (2008) CADS_TOOL (Cage Aquaculture Decision Support Tool). Australian Centre for International Agricultural Research and Australian Institute of Marine Science.

local : articleId=7831

Developing a decision support system for sustainable cage aquaculture: Halide H, Stigebrandt A, Rehbein MA and McKinnon AD (2009) Developing a decision support system for sustainable cage aquaculture. Environmental Modelling and Software 24:694-702.

local : articleId=7973

Identifiers
  • global : bd1a43f0-fafc-11dc-b047-00008a07204e