Data

500 metre interval contours of Antarctica derived from ERS radar altimetry data.

Australian Antarctic Division
Brolsma, H. and Smith, D.T. ; BROLSMA, HENK ; SMITH, DAVID T.
Viewed: [[ro.stat.viewed]] Cited: [[ro.stat.cited]] Accessed: [[ro.stat.accessed]]
ctx_ver=Z39.88-2004&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Adc&rfr_id=info%3Asid%2FANDS&rft_id=http://data.aad.gov.au/metadata/ERS_CONT_500_ANT&rft.title=500 metre interval contours of Antarctica derived from ERS radar altimetry data.&rft.identifier=http://data.aad.gov.au/metadata/ERS_CONT_500_ANT&rft.publisher=Australian Antarctic Data Centre&rft.description=500 metre interval contours of the Antarctic continent derived from slope corrected orthometric heights that were captured using European Remote Sensing (ERS) radar altimetry.ESA's two European Remote Sensing (ERS) satellites, ERS-1 and 2, were launched into the same orbit in 1991 and 1995 respectively. Their payloads included a synthetic aperture imaging radar, radar altimeter and instruments to measure ocean surface temperature and wind fields.ERS-2 added an additional sensor for atmospheric ozone monitoring. The two satellites acquired a combined data set extending over two decades.The ERS-1 mission ended on 10 March 2000 and ERS-2 was retired on 05 September 2011.Progress Code: completedStatement: This shapefile of contours was interpolated from a triangulated irregular network that was generated from slope corrected orthometric heights of Antarctica. These heights were derived using ERS radar altimetry. The ArcView 3D analyst was used to interpolate the contours. The resulting shapefile was converted to an Arc/Info coverage. The Arcedit generalize command was used to thin the contours using a tolerance of 500 metres. The resulting contours were splined with a grain tolerance of 100. Finally the contours were manually cleaned and then generalised with a tolerance of 10 metres. The void area at the centre of the continent was removed using the erase command. A certainty value of approximate was assigned to contours that fell within areas of invalid heights as indicated by the reliability shapefile (refer to metadata record ERS_REL_ANT). On completion, the coverage was converted to a shapefile.&rft.creator=Brolsma, H. and Smith, D.T. &rft.creator=BROLSMA, HENK &rft.creator=SMITH, DAVID T. &rft.date=2003&rft.coverage=westlimit=-180; southlimit=-82; eastlimit=180; northlimit=-65&rft.coverage=westlimit=-180; southlimit=-82; eastlimit=180; northlimit=-65&rft.coverage=uplimit=4100; downlimit=8&rft.coverage=uplimit=4100; downlimit=8&rft_rights=Available unprojected or in a Polar Stereographic projection with true scale at 71 degrees S. This dataset is publicly available for download at the provided URL.&rft_rights=Attribution 4.0 International (CC BY 4.0) https://creativecommons.org/licenses/by/4.0/legalcode&rft_rights=This data set conforms to the CCBY Attribution License (http://creativecommons.org/licenses/by/4.0/). Please follow instructions listed in the citation reference provided at http://data.aad.gov.au/aadc/metadata/citation.cfm?entry_id=ERS_CONT_500_ANT when using these data.&rft_rights=This metadata record is publicly available.&rft_subject=elevation&rft_subject=EARTH SCIENCE > LAND SURFACE > TOPOGRAPHY > TERRAIN ELEVATION&rft_subject=ALTIMETRY&rft_subject=ANTARCTICA&rft_subject=DTM&rft_subject=ERS&rft_subject=ELEVATION&rft_subject=RADAR&rft_subject=Radar Altimeters&rft_subject=ERS-1 > European Remote Sensing Satellite-1&rft_subject=ERS-2 > European Remote Sensing Satellite-2&rft_subject=AMD/AU&rft_subject=AMD&rft_subject=CEOS&rft_subject=CONTINENT > ANTARCTICA&rft_subject=GEOGRAPHIC REGION > POLAR&rft.type=dataset&rft.language=English Access the data

Licence & Rights:

Open Licence view details
CC-BY

Attribution 4.0 International (CC BY 4.0)
https://creativecommons.org/licenses/by/4.0/legalcode

Available unprojected or in a Polar Stereographic projection with true scale at 71 degrees S.

This dataset is publicly available for download at the provided URL.

This data set conforms to the CCBY Attribution License (http://creativecommons.org/licenses/by/4.0/).

Please follow instructions listed in the citation reference provided at http://data.aad.gov.au/aadc/metadata/citation.cfm?entry_id=ERS_CONT_500_ANT when using these data.

This metadata record is publicly available.

Access:

Other

Full description

500 metre interval contours of the Antarctic continent derived from slope corrected orthometric heights that were captured using European Remote Sensing (ERS) radar altimetry.

ESA's two European Remote Sensing (ERS) satellites, ERS-1 and 2, were launched into the same orbit in 1991 and 1995 respectively. Their payloads included a synthetic aperture imaging radar, radar altimeter and instruments to measure ocean surface temperature and wind fields.

ERS-2 added an additional sensor for atmospheric ozone monitoring. The two satellites acquired a combined data set extending over two decades.

The ERS-1 mission ended on 10 March 2000 and ERS-2 was retired on 05 September 2011.

Lineage

Progress Code: completed
Statement: This shapefile of contours was interpolated from a triangulated irregular network that was generated from slope corrected orthometric heights of Antarctica. These heights were derived using ERS radar altimetry. The ArcView 3D analyst was used to interpolate the contours. The resulting shapefile was converted to an Arc/Info coverage. The Arcedit generalize command was used to thin the contours using a tolerance of 500 metres. The resulting contours were splined with a grain tolerance of 100. Finally the contours were manually cleaned and then generalised with a tolerance of 10 metres. The void area at the centre of the continent was removed using the erase command. A certainty value of approximate was assigned to contours that fell within areas of invalid heights as indicated by the reliability shapefile (refer to metadata record ERS_REL_ANT). On completion, the coverage was converted to a shapefile.

Data time period: 2003-01-01 to 2003-01-31

This dataset is part of a larger collection

Click to explore relationships graph

180,-65 180,-82 0,-82 -180,-82 -180,-65 0,-65 180,-65

0,-73.5

text: westlimit=-180; southlimit=-82; eastlimit=180; northlimit=-65

text: uplimit=4100; downlimit=8

Other Information
Download 500 metre interval contours derived from ERS Radar Altimeter data (GET DATA)

uri : https://data.aad.gov.au/eds/1173/download

European Remote Sensing Information (VIEW RELATED INFORMATION > GENERAL DOCUMENTATION)

uri : https://earth.esa.int/web/guest/missions/esa-operational-eo-missions/ers

Search the SCAR Feature Catalogue, dataset identifiers and quality information indicators (VIEW RELATED INFORMATION)

uri : http://data.aad.gov.au/aadc/ftc/index.cfm

Citation reference for this metadata record and dataset (VIEW RELATED INFORMATION)

uri : http://data.aad.gov.au/aadc/metadata/citation.cfm?entry_id=ERS_CONT_500_ANT

Identifiers
  • global : ERS_CONT_500_ANT