Data

Total Magnetic Intensity (TMI) grid of Tasmania Composite Grids survey

Geoscience Australia
Geophysical Acquisition & Processing Section
Viewed: [[ro.stat.viewed]] Cited: [[ro.stat.cited]] Accessed: [[ro.stat.accessed]]
ctx_ver=Z39.88-2004&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Adc&rfr_id=info%3Asid%2FANDS&rft_id=http://pid.geoscience.gov.au/dataset/ga/105514&rft.title=Total Magnetic Intensity (TMI) grid of Tasmania Composite Grids survey&rft.identifier=http://pid.geoscience.gov.au/dataset/ga/105514&rft.publisher=Commonwealth of Australia (Geoscience Australia)&rft.description=Total magnetic intensity (TMI) data measures variations in the intensity of the Earth's magnetic field caused by the contrasting content of rock-forming minerals in the Earth crust. Magnetic anomalies can be either positive (field stronger than normal) or negative (field weaker) depending on the susceptibility of the rock. The data are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This magnetic grid has a cell size of 0.001019 degrees (approximately 100m). The data used to produce this grid was acquired in UNKNOWN by the UNKNOWN Government, and consisted of UNKNOWN line-kilometres of data at 1000m line spacing and 100m terrain clearance.This mTas0062SWW.nc grid is an airborne-derived Total Magnetic Intensity (TMI) grid for the Tasmania Composite Grids survey. The survey was acquired under the project No. 62 for the geological survey of UNKNOWN. The grid has a cell size of 0.001019 degrees (approximately 100m). A total of UNKNOWN line-kilometres of data at a line spacing of 1000m were acquired to produce this grid. To constrain long wavelengths in the grid, an independent data set, the Australia-wide Airborne Geophysical Survey (AWAGS) airborne magnetic data, was used to control the base levels of the survey grid (Milligan et al., 2009). This survey grid is essentially levelled to AWAGS. Details of the specifications of individual airborne surveys can be found in the Fourteenth Edition of the Index of Airborne Geophysical Surveys (Percival, 2014). This Index is also available online at http://pid.geoscience.gov.au/dataset/79134. Further up to date information about individual surveys can also be obtained online from the Airborne Surveys Database at http://www.ga.gov.au/oracle/argus/. The original grid was converted from ERMapper (.ers) format to netCDF4_classic format using GDAL1.11.1. The main purpose of this conversion is to enable access to the data by relevant open source tools and software. The netCDF grid was created on 2016-08-29T10:51:42, 2013-05-03T00:00:00 and has its y-axis indexed Southward-positive. References Milligan, P.R., Minty, B.R.S., Richardson, M. & Franklin, R., 2009. The Australia-wide Airborne Geophysical Survey accurate continental magnetic coverage. Preview, No. 138, p. 1-128. Percival, P.J., 2014. Index of airborne geophysical surveys (Fourteenth Edition).&rft.creator=Geophysical Acquisition & Processing Section &rft.date=2011&rft.coverage=northlimit=-40.719343; southlimit=-43.620436; westlimit=145.189258; eastLimit=148.570300&rft.coverage=northlimit=-40.719343; southlimit=-43.620436; westlimit=145.189258; eastLimit=148.570300&rft_rights=Creative Commons Attribution 4.0 International Licence http://creativecommons.org/licenses/by/4.0&rft_subject=geoscientificInformation&rft_subject=TMI&rft_subject=magnetics&rft_subject=magnetism and palaeomagnetism&rft_subject=airborne digital data&rft_subject=geophysical survey&rft_subject=survey 62&rft_subject=AWAGS&rft_subject=NCI&rft_subject=Earth sciences&rft_subject=geophysics&rft_subject=grid&rft_subject=Australia&rft_subject=TAS&rft_subject=Published_External&rft.type=dataset&rft.language=English Access the data

Licence & Rights:

Open Licence view details
CC-BY

Creative Commons Attribution 4.0 International Licence
http://creativecommons.org/licenses/by/4.0

Access:

Open

Contact Information

clientservices@ga.gov.au

Brief description

Total magnetic intensity (TMI) data measures variations in the intensity of the Earth's magnetic field caused by the contrasting content of rock-forming minerals in the Earth crust. Magnetic anomalies can be either positive (field stronger than normal) or negative (field weaker) depending on the susceptibility of the rock. The data are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose.
This magnetic grid has a cell size of 0.001019 degrees (approximately 100m). The data used to produce this grid was acquired in UNKNOWN by the UNKNOWN Government, and consisted of UNKNOWN line-kilometres of data at 1000m line spacing and 100m terrain clearance.

Lineage

This mTas0062SWW.nc grid is an airborne-derived Total Magnetic Intensity (TMI) grid for the Tasmania Composite Grids survey. The survey was acquired under the project No. 62 for the geological survey of UNKNOWN. The grid has a cell size of 0.001019 degrees (approximately 100m). A total of UNKNOWN line-kilometres of data at a line spacing of 1000m were acquired to produce this grid. To constrain long wavelengths in the grid, an independent data set, the Australia-wide Airborne Geophysical Survey (AWAGS) airborne magnetic data, was used to control the base levels of the survey grid (Milligan et al., 2009). This survey grid is essentially levelled to AWAGS. Details of the specifications of individual airborne surveys can be found in the Fourteenth Edition of the Index of Airborne Geophysical Surveys (Percival, 2014). This Index is also available online at http://pid.geoscience.gov.au/dataset/79134. Further up to date information about individual surveys can also be obtained online from the Airborne Surveys Database at http://www.ga.gov.au/oracle/argus/.
The original grid was converted from ERMapper (.ers) format to netCDF4_classic format using GDAL1.11.1. The main purpose of this conversion is to enable access to the data by relevant open source tools and software. The netCDF grid was created on 2016-08-29T10:51:42, 2013-05-03T00:00:00 and has its y-axis indexed Southward-positive.
References
Milligan, P.R., Minty, B.R.S., Richardson, M. & Franklin, R., 2009. The Australia-wide Airborne Geophysical Survey accurate continental magnetic coverage. Preview, No. 138, p. 1-128.
Percival, P.J., 2014. Index of airborne geophysical surveys (Fourteenth Edition).

Issued: 2011

Data time period: 1986-06-30

This dataset is part of a larger collection

148.5703,-40.71934 148.5703,-43.62044 145.18926,-43.62044 145.18926,-40.71934 148.5703,-40.71934

146.879779,-42.1698895

text: northlimit=-40.719343; southlimit=-43.620436; westlimit=145.189258; eastLimit=148.570300

Subjects

User Contributed Tags    

Login to tag this record with meaningful keywords to make it easier to discover

Other Information
Digital Object Identifier for dataset 5d2bb0e7-aee5-46fe-899b-43777bb7ebf7

doi : http://dx.doi.org/10.4225/25/589c5f2a73bac

Fully qualified pathname of NetCDF file on NCI filesystem for dataset 5d2bb0e7-aee5-46fe-899b-43777bb7ebf7. Users must be logged onto the NCI network to access this file system. (md5sum=3fa49e57e5e4c9d339944b2f0578140d) (NetCDF file on NCI filesystem for dataset 5d2bb0e7-aee5-46fe-899b-43777bb7ebf7)

local : file:///g/data1/rr2/airborne_geophysics/Tas/P62/magnetics/grid/mTas0062SWW/mTas0062SWW.nc

Identifiers